November 14, 2024, 11:37:17 AM
« previous next »
Pages: [1]

Author Topic: Long Ball  (Read 994 times)

Offline cml001

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 684
Long Ball
« on: September 30, 2015, 08:20:50 PM »
Hey guys, I got the longer ball studs to run from the swash to the pitch arms... Is there anything other than re-setting 0 & setting my pitch limits that I need to worry about? Gonna be soon this on both the N5C & E7SE.
« Last Edit: September 30, 2015, 08:27:15 PM by cml001 »
Logged
Clay
I can fly helicopters... Upside down!

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: Long Ball
« Reply #1 on: September 30, 2015, 08:52:26 PM »
Make sure to shorten the threads on them before installing them.
Logged
Rodney

Team Synergy

Offline Kevin Dalrymple

  • Field Representative
  • Sr. Member
  • ****
  • Posts: 397
Long Ball
« Reply #2 on: September 30, 2015, 09:05:52 PM »
You should not need the long ball mod on the E7SE. They run shorter arms on the grips then the E7.   So the geo is correct. If you want super fast flip and roll rates add them. Matt had a note in the build section on this.

The N5C needs them and as Rodney said. Shorten the thread or you will bottom the threads out into the swash mono ball and ruin the swash.
« Last Edit: September 30, 2015, 09:07:42 PM by Kevin Dalrymple »
Logged
Synergy Field Rep
Rail Blades Field Rep
Pages: [1]
« previous next »