November 21, 2024, 04:08:33 PM

Author Topic: Slow Motion 101  (Read 3317 times)

Offline flyercld

  • Newbie
  • *
  • Posts: 33
Slow Motion 101
« on: September 08, 2014, 06:12:52 PM »
I just saw the vid with Matt flying 12s on his E7, land and then changed out to 6s. The heli flew without any problems.
He used a jumper (what is that) all about? I sure would like to try that out ;D ;D ;D

Charles

Offline Kevin Dalrymple

  • Field Representative
  • Sr. Member
  • ****
  • Posts: 397
Re: Slow Motion 101
« Reply #1 on: September 08, 2014, 08:42:44 PM »
Do a search for the jumper on YouTube under Synergy. Josh Moen shows how to make one and use it.

All it really is a jumper that replaces one of the lipos.
Synergy Field Rep
Rail Blades Field Rep

Offline James F

  • Full Member
  • ***
  • Posts: 183
Re: Slow Motion 101
« Reply #2 on: September 10, 2014, 03:07:00 PM »
Curve a wire to both sides of a battery plug.  It just completes the circuit so both positive and negative leads are connected.  Kinda like flipping on a light switch.  If I ever go 6cell on my e5 I would still use the jumper but extend it to the rear so I could arm the esc after putting 5he canopy on.

Offline flyercld

  • Newbie
  • *
  • Posts: 33
Re: Slow Motion 101
« Reply #3 on: September 11, 2014, 07:10:53 PM »
Ok great  8) 8) 8). Just something I'll give a try.