November 24, 2024, 09:20:22 AM
« previous next »
Pages: [1]

Author Topic: Auto Clutch Lubrication  (Read 2768 times)

Offline Kandy04

  • Newbie
  • *
  • Posts: 9
Auto Clutch Lubrication
« on: June 24, 2018, 11:42:54 PM »
I have a 766 Gasser and I recently noticed that the auto clutch is not as free as it was.
I used TriFlow Grease in it when I assembled the kit. I'm just wondering if I should have used something thinner?

Any thoughts?

Kandace
Logged

Offline Chuck Bole

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 631
Re: Auto Clutch Lubrication
« Reply #1 on: July 13, 2018, 09:21:38 PM »
 I've always used Tri-flow oil in a one way bearing. I imagine any lite machine oil would work though. The manual states using grease on the delrin shims that ride against the bronze bushings for the one way hub. But use oil in the one way. Do not use grease.

chuck
Logged
Team Synergy Field Representative / Thunder Power

Offline Cliff Chmiel

  • Synergy Veteran
  • *
  • Posts: 588
  • Cliff
Re: Auto Clutch Lubrication
« Reply #2 on: September 26, 2018, 08:12:25 AM »
I have heard some guys using ATF. I just use a 3and1 oil like machine oil thin. Cliff
Logged
Cliff
Pages: [1]
« previous next »