Cyclic servo for 766

[Stetsons]

Hi,

I was planning to get an Synergy 766.
Would these servo would be strong enough for cyclic?
I am sport flier mild 3d. More F3C style


Standard Size Coreless Digital Servo, .08 sec/166 oz-in @ 6V - SAVSC1258TG

The SC1258TG is a high speed standard size servo which combines leading edge technology with super high 12-bit (4096) resolution for smooth operation.

Features:•Extremely strong titanium gears ensure long-life, durability, and light weight.
•Ideal for CCPM on 600 and 700 class heli, steering servo on 1/10 scale buggies.
•Aluminum middle case allows for cooler operating temperatures.
Specifications:•Torque @ 4.8v - 9.6kg/133.3oz-in
•Torque @ 6v - 12.0kg166.6oz-in
•Speed @ 4.8v - 0.10 sec/60 deg
•Speed @ 6v - 0.08 sec/60 deg
•Dimensions L x W x H (mm): 40.8 x 20.2 x 37.2
•Weight: 52.4g


Would probably upgrade later when my flying improved.

[Jesse.Allen]

These servos will work just fine for the 766 if your going to sport fly or even light 3D. I have had very good results with Savox servos across the board with heli and airplane models. Run the highest voltage possible for best results.
Good luck and happy flying!

[freeskiken]

I have the Savox 1258 TG in my E7SE. I have tried them in quite a few Helis and they work fine. On some builds I started switching to MKS but the Savox have work flawlessly.

[Cliff Chmiel]

Im running the bk 7001 hv  with no problems