Synergy 626

[Gazza]

Hi, Just joined this support forum , Have a Synergy E5 Stretched to 626 just wondering why I don't see much about the 626 anywhere …?
Would like to finish off a night 626 but need the torque tube but don't have the part number , also need the inside the boom guide bearings … Don't do 3D just sport flying , would like to know tail drive bevel gear teeth & part number front & back for the 626 , does the main gear and tail drive gear change ratio also...?


Cheers


Gazza...

[Grimmy]

Here is the torque tube number you are looking for: 320-501


Matt has a 626 stretch kit on his site that includes the boom, torque tube and tail control rod: https://www.mattbotos.com/store/index.php?main_page=product_info&cPath=20_34&products_id=2078&zenid=b022134e3887cf60464b229a670db1e2

The bearings are the same, and don't change by just stretching....although bearing placement is changed a little.  The bevel gears are the same as well.  You can speed up the tail, if you want.  Depends on the headspeed your run, if you should speed up the tail or not.

If you want to speed up the tail, here are the 2 gears you need:

54T gear : https://www.mattbotos.com/store/index.php?main_page=product_info&cPath=0&products_id=1789&zenid=b022134e3887cf60464b229a670db1e2
11T gear : https://www.mattbotos.com/store/index.php?main_page=product_info&cPath=4_27&products_id=1955


I run a 626, started out a 550.  It was my first heli, and been my most reliable and fun to fly.  It's in timeout right now, due to wanting to upgrade some electrical components, and get it on my Vcontrol.