November 22, 2024, 03:11:04 AM

Author Topic: Side Panels  (Read 2182 times)

Offline Hoggers

  • Newbie
  • *
  • Posts: 2
Side Panels
« on: February 22, 2020, 07:34:46 PM »
Hi All,
I have recently completed the 766 build and also have test flown it with no real issues.  I have noticed though that the side panels are free to move a little with the fasteners secured.  I am not sure if this was the case when I originally fitted them.  I don't think it is a big issue but curious is this is normal.  Perhaps some grommets would have been nice here. Thanks in advance.
Ray

Offline curmudgeon

  • Synergy Veteran
  • *
  • Posts: 578
Re: Side Panels
« Reply #1 on: February 22, 2020, 07:48:45 PM »
It has been a while since I sold the 766 airframe, but I believe I installed rubber O-rings (Home Depot, plumbing aisle) between the airframe studs and the side panels to prevent the "play" you are experiencing.

Offline Hoggers

  • Newbie
  • *
  • Posts: 2
Re: Side Panels
« Reply #2 on: February 23, 2020, 01:38:26 AM »
Thanks curmudgeon.  It sounds like the freeplay may be normal to prevent stress cracks from occurring.