October 31, 2024, 07:09:33 PM

Author Topic: Futaba Questions  (Read 2225 times)

Offline RyanW

  • Full Member
  • ***
  • Posts: 162
Futaba Questions
« on: June 21, 2012, 10:37:41 AM »
Hello,
   I am new to the Futaba world, so I have a few questions:

-On the N5C, do you use the stock Futaba wheels or are there specific arms/wheels that are best to use with the Futaba servos?

-Receivers... I currently have the 6203 mini rx with a VBar. I see there is the 6202SBW, which says it is HV, but the specs are exactly the same as the 6203. Can anyone shed light on the actual differences?

-Throttle servo for N5C, which servo best fits the frame? (and can be run at 6.6v)

Thanks!
-Ryan
-Ryan

Offline beans07

  • Member
  • **
  • Posts: 68
Re: Futaba Questions
« Reply #1 on: August 04, 2012, 08:30:36 PM »
Hi Ryan,

I am using the futaba + servo arms with great results on BLS351's. The star ones would also work the same.

I use the Futaba 6203SB receiver. From I what I have read the SBW one is for RC Cars. It has 2 sbus connections. 1 am thinking may be for the car telemetry.

I am using the futaba 9650 on 2s life 6.6v. It runs fine but the servo horn flex's too much for my liking on this servo. I am looking at trying a more solid disk on this servo to take all the flex out but don't know how well the servo will take it. Otherwise I will look at other brands, that have more variety.