November 23, 2024, 02:53:09 AM
« previous next »
Pages: 1 [2]

Author Topic: How Hot Is Too Hot  (Read 4767 times)

Offline Pete Busch

  • Newbie
  • *
  • Posts: 19
Re: How Hot Is Too Hot
« Reply #15 on: July 01, 2012, 01:41:22 PM »
See if this works

[attachment deleted by admin]
Logged

Offline Pete Busch

  • Newbie
  • *
  • Posts: 19
Re: How Hot Is Too Hot
« Reply #16 on: July 01, 2012, 01:43:25 PM »
It looks like my esc temp peaked out at around 175 but when I land and check it its around 120-130
Logged

Offline litespeed

  • Field Representative
  • Full Member
  • ****
  • Posts: 163
Re: How Hot Is Too Hot
« Reply #17 on: July 01, 2012, 06:19:07 PM »
Why does the Castle Graph show "2 pole" on the RPM? You sure you have your pole count correctly? That will make a huge difference. Also next time you post a graph leave out the stuff we don't need like the throttle in/out, amp hours and ripple or post multiple graphs showing just some of the statistics. Also if you go to the upper tabs you can click on single "sessions" so 5 flights graphs aren't jumbled up on the page. It puts too much info in too small of a space. Just trying to help you help us to help you.....did I just write that? ;D

Tom
Logged

Offline Pete Busch

  • Newbie
  • *
  • Posts: 19
Re: How Hot Is Too Hot
« Reply #18 on: July 01, 2012, 08:19:13 PM »
I just checked the software and its set to 10 pole, now I'm confused

Thanks for the other info, never posted a graph before.
Logged

Offline Pete Busch

  • Newbie
  • *
  • Posts: 19
Re: How Hot Is Too Hot
« Reply #19 on: July 01, 2012, 08:26:05 PM »
Ok, this graph is from session 2 out of the previous graph with the exception of I changed the pole count from 10, down to 2, then back up to 10 and hit update. I have no idea why it now says 10, totally confused.

[attachment deleted by admin]
Logged
Pages: 1 [2]
« previous next »