Belt Drive E7 - Right Rudder Travel - Do not use all of it!!

[Matt Botos]

On the E7 Belt Drive Kit....Do not use all of your right rudder travel. You will stall the tail blades when the gyro is trying to compensate!
Leave a 4mm gap between brass slider and tail box flange bearing. See shitty picture for illustration of correct amount of travel.

Thanks,

Matt

[attachment deleted by admin]

[Funky]

Is it 4mm from the bearing itself or 4mm from the bearing housing?

I am using the torque tube tailbox if that makes a difference

[Kevin Dalrymple]

From the bearing to the slider. Hope that helps.

[Anthony Oxlade]

I believe if you are using the torque tube tail box you need to use all available rudder travel. Matt's recommended 4 mm gap is for the belt drive version.