November 10, 2024, 03:39:36 PM

Author Topic: Clutch bell  (Read 1443 times)

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Clutch bell
« on: March 30, 2013, 07:07:24 PM »
Since I'm new to the whole nitro drive train... Is it normal for the clutch bell to rattle?  Is that why it's called a clutch bell, because it does rattle all the time and ring like a bell?  Or, is something loose?
Rodney

Team Synergy

Offline Chris Sexton

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2729
  • Admiral, There be whales here!
Clutch bell
« Reply #1 on: March 30, 2013, 08:15:24 PM »
My clutch bells don't make any rattling noise. I would check things out.
Chris Sexton
Synergy Factory Specialist / Rail Blades / Team Scorpion

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: Clutch bell
« Reply #2 on: March 30, 2013, 10:36:31 PM »
I didn't think it was rattling the first couple of times I fired it up so I figured I'd check. Thanks Chris.
Rodney

Team Synergy

Offline Brandon Bartolomucci

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1007
Clutch bell
« Reply #3 on: March 31, 2013, 02:05:24 AM »
A rattling definitely not. Now I have had bells in the past make a "bell dinging" sound occasionally. I would regardless go through and verify the clutch stack & motor are aligned from the bottom up.


Regards,
Brandon Bartolomucci
Sent from my iPhone
Regards,
Brandon Bartolomucci
Team Synergy; Scorpion; & Bavarian Demon

Offline Ross Lawton

  • Factory Specialist
  • Synergy Veteran
  • *****
  • Posts: 793
Re: Clutch bell
« Reply #4 on: March 31, 2013, 06:47:36 AM »
Hi Roodney,

The clutch bell and stack shouldn't rattle, I would disassemble and check the assembly and condition of the clutch stack and also the alignment of the engine and clutch stack.

Keep us updated

Cheers,
Ross
Team Synergy - UK

Offline Tommy Wagner

  • Field Representative
  • Sr. Member
  • ****
  • Posts: 418
Re: Clutch bell
« Reply #5 on: March 31, 2013, 09:33:18 AM »
What starter are you using? Maybe the wand is slightly bent? just something to look for.