June 30, 2024, 05:26:42 AM

Author Topic: Boto lube uses  (Read 2406 times)

Offline Greg Jackson

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1493
    • inner3.com
Boto lube uses
« on: July 03, 2013, 11:52:03 PM »
This has been asked before, but do any of you use Boto lube on your thrust bearings?  About to get another kit and I forget whether or not I used that or something else.  Remember, Boto lube is for everything.  After we made jambalaya I cleaned the pot with Boto lube.  Tomorrow for the 4th I plan to use some to help the fireworks explode louder.
Synergy & Rail Field Representative
Team Scorpion||Team BK Servos||Team Pulse|

www.inner3.com

Offline jabull

  • Member
  • **
  • Posts: 56
Re: Boto lube uses
« Reply #1 on: July 04, 2013, 12:36:01 AM »
Yes and love the fact that on the E5 there is a little hole in the blade grips for shooting boto lube into the thrust bearings.  You could use it to make your lawn mower mow grass faster too.
Synergy E5, Protos 500, 130X, Wife and 4 Teenagers, CS Fender Strat, Old truck, Software Engineer

Offline curmudgeon

  • Synergy Veteran
  • *
  • Posts: 578
Re: Boto lube uses
« Reply #2 on: July 04, 2013, 08:38:09 AM »
I don't know if the Boto-Lube is any better than other lubes.  However, I take it on faith that it is the most optimal lube for thrust bearings, so it is the one I use.  The syringe style with long nozzle delivery system is the best I've seen.  I no longer get grease on my hands and fingers, something I despise.  The grease holes on the E5 blade grips are the icing on the cake.

Will the E7SE also have grease holes on the blade grips?

flyalan

  • Guest
Re: Boto lube uses
« Reply #3 on: July 04, 2013, 08:41:42 AM »
I don't know if the Boto-Lube is any better than other lubes.  However, I take it on faith that it is the most optimal lube for thrust bearings, so it is the one I use.  The syringe style with long nozzle delivery system is the best I've seen.  I no longer get grease on my hands and fingers, something I despise.  The grease holes on the E5 blade grips are the icing on the cake.

Will the E7SE also have grease holes on the blade grips?

Yes the SE has the holes  ;D
 
Cheers
Alan

Offline Brandon Bartolomucci

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1007
Boto lube uses
« Reply #4 on: July 04, 2013, 08:56:45 AM »
Use it for thrust bearings for sure. I also placed it on my main gear of my E5 just for fun. Love the stuff.


Regards,
Brandon Bartolomucci
Sent from my iPhone
Regards,
Brandon Bartolomucci
Team Synergy; Scorpion; & Bavarian Demon

Offline Greg Jackson

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1493
    • inner3.com
Re: Boto lube uses
« Reply #5 on: July 04, 2013, 11:02:50 AM »
Great.  I spent the money on it and would like to use it more than just the 3 times I have used it.  Now other helis will have a little Synergy blood in it. 
Synergy & Rail Field Representative
Team Scorpion||Team BK Servos||Team Pulse|

www.inner3.com

Offline Greg Jackson

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1493
    • inner3.com
Re: Boto lube uses
« Reply #6 on: July 04, 2013, 11:05:24 AM »
  The grease holes on the E5 blade grips are the icing on the cake.



I will try it on some cake today too.
Synergy & Rail Field Representative
Team Scorpion||Team BK Servos||Team Pulse|

www.inner3.com

Offline jabull

  • Member
  • **
  • Posts: 56
Boto lube uses
« Reply #7 on: July 05, 2013, 01:29:07 AM »

  The grease holes on the E5 blade grips are the icing on the cake.



I will try it on some cake today too.

Just use it like chap stick
Synergy E5, Protos 500, 130X, Wife and 4 Teenagers, CS Fender Strat, Old truck, Software Engineer

Offline Greg Jackson

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1493
    • inner3.com
Re: Boto lube uses
« Reply #8 on: July 05, 2013, 02:06:33 AM »
I just did an infomercial about Boto Lube. 
Synergy & Rail Field Representative
Team Scorpion||Team BK Servos||Team Pulse|

www.inner3.com