November 21, 2024, 04:18:42 PM
« previous next »
Pages: 1 [2]

Author Topic: Power switch  (Read 5367 times)

Offline Rctintin

  • Member
  • **
  • Posts: 86
Re: Power switch
« Reply #15 on: November 11, 2013, 01:59:40 PM »
Quote from: mdu6 on November 11, 2013, 05:03:36 AM
Quote
an XT60 on it straight into the mating XT60

Good solution ... but like anything not without risk, as you are going to be pulling hundred+ time a year on those connector and cables.

I feel the same way about the switch though. If you look at lipos in the E5/E7 etc, we plug those in multiple times with no issue. I do ever so often push an allen driver into the centre of my (male) bullet connector to keep it tight on the female. No issues so far with hundreds of flights on lots of helis and (don't tell anyone....) planks!!
Logged
Rob Bingham

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: Power switch
« Reply #16 on: November 11, 2013, 02:54:48 PM »
Yeah, I'm sure the connector thing works great but isn't using $5 worth of connectors instead a $60 switch kind of going against everything this hobby is all about?  ;D
Logged
Rodney

Team Synergy

Offline Rctintin

  • Member
  • **
  • Posts: 86
Re: Power switch
« Reply #17 on: November 11, 2013, 06:07:59 PM »
Not really thought of it that way, but in EC5's etc we trust our lipos with huge currents flowing, so I'm more than happy just plugging in my 2s lipo direct via XT60's or perhaps EC3's.

This, I believe, is how the King of 3D Mr Curtis Youngblood flies all his heli's, he does not trust a switch. Simplicity is best.
Logged
Rob Bingham

flyalan

  • Guest
Re: Power switch
« Reply #18 on: November 11, 2013, 07:05:02 PM »
I will be using the JEti DPS 40 failsafe switches on mine...

Cheers
Alan
Logged

Offline Chris Sexton

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2729
  • Admiral, There be whales here!
Re: Power switch
« Reply #19 on: November 11, 2013, 07:19:54 PM »
Quote from: flyalan on November 11, 2013, 07:05:02 PM
I will be using the JEti DPS 40 failsafe switches on mine...

Cheers
Alan

wow Alan i had never seen one of those. I might switch my plan. I like the Scott Grey products that switch is $100 less with great specs. straight 2s lipo is perfect for my servos.
Logged
Chris Sexton
Synergy Factory Specialist / Rail Blades / Team Scorpion

Offline mdu6

  • Member
  • **
  • Posts: 51
Re: Power switch
« Reply #20 on: November 11, 2013, 07:22:38 PM »
Logged

Offline Jean-Luc Bolduc

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 614
Re: Power switch
« Reply #21 on: November 11, 2013, 07:54:53 PM »
I plan on using direct connection with the rx lipo with a EC3. No switches to fail.
Logged
Team Synergy

Offline Jon Mills

  • Field Representative
  • Sr. Member
  • ****
  • Posts: 308
Re: Power switch
« Reply #22 on: November 11, 2013, 08:46:26 PM »
I'm going to hard-wire mine with a generator then fly it for the rest of my life nonstop!

Really though haven't made up my mind. If I do use a switch it will be the one I linked in this thread.  Its a fail-safe electronic switch that's turned on by a magnet in theory it can never wear out. Plus I like the remove before flight thing dangling from it. 8)
Logged

Offline bkervaski

  • Factory Specialist
  • Sr. Member
  • *****
  • Posts: 424
Re: Power switch
« Reply #23 on: November 12, 2013, 08:24:13 AM »
Quote
I'm going to hard-wire mine with a generator then fly it for the rest of my life nonstop!

ChapaWolf is HARD CORE!!!

Futaba HD Switch + 2S2P Thunder Power Packs here ...
Logged

Offline Rctintin

  • Member
  • **
  • Posts: 86
Re: Power switch
« Reply #24 on: November 12, 2013, 04:30:44 PM »
Thanks for that Alan, I have copied you and ordered one...  http://www.electricwingman.com/product.aspx?product=1583
Logged
Rob Bingham

flyalan

  • Guest
Re: Power switch
« Reply #25 on: November 12, 2013, 06:20:13 PM »
Quote from: Rctintin on November 12, 2013, 04:30:44 PM
Thanks for that Alan, I have copied you and ordered one...  http://www.electricwingman.com/product.aspx?product=1583

You are welcome Rob.  Pretty reasonably priced for what it is..  I get my Jeti stuff from Esprit..

Cheers

Alan
« Last Edit: November 15, 2013, 10:05:24 AM by flyalan »
Logged

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: Power switch
« Reply #26 on: November 15, 2013, 10:04:13 AM »
I ended up ordering the Fromeco switch, after all.
Logged
Rodney

Team Synergy

Offline mdu6

  • Member
  • **
  • Posts: 51
Re: Power switch
« Reply #27 on: November 23, 2013, 11:19:48 AM »
Here is the JR failsafe Switch I will be using.

Comes with a Dean connector, connector for binding and dual outputs.

I simply replaced the Dean with an EC3 connector,  than removed the connector for binding and signal wire that is provided on one of the output cable for binding.

Switch is 'always' on - inserting the provided 'bind' connector will shut if off.


Logged
Pages: 1 [2]
« previous next »