14sg and switch glo pro

[Richard Rollins]

I am having a time getting this to work since I changed to the SBUS2 rx. 7008sb.. Anyone have some info on how to control the SWITCHGLO Pro on a switch say SC like I had it with the 6008?
Thanks,
Rick

[Mark Burberry]

Rick,

For example: On a Vbar you would plug the Switchglo Pro into the Aux 2 port and assign the Aux 2 channel 5. Then on the TX you would go to the Function menu, associate channel 5 with Auxiliary 2 and assign a switch.

Hope this helps.

Cheers,
Mark

[Jon Mills]

I switched channel 3 (throttle) with channel 11 (aux1), I assigned  switch SA and the Dip switch position is 1on 2off 3on 4off on the switch glo. Which will give you the tx and beep. I had a hell of a time getting switchglo working like I wanted with 14sg. I couldn't get it to work on channel one or two. Hope this helps.

[flyalan]

Yes.  Unless your FBL unit can output an Aux Channel you need a 7008SB.
You can use a SBD-1 SBus decoder also which will output 3 channel from SBus independent of the FBL unit.

Cheers

Alan

[Rodney Kirstine]

I am running R7008sb receivers with CGY-750s on both my nitro helis and have the swtchglo pro plugged into the receivers.

When I was using an SK540 on my N5C, I had the swtchglo pro plugged into the extra swash servo port on it because it would output as aux2 when the swash type was set to a 3-servo type.

Sent from my MotoX via Tapatalk2

[Richard Rollins]

Thanks for the replys. Jon can you elaborate on how you moved the throttle channel from 3 to 11 ??what menu you used ? I have been working on all suggestions. MJ aux2 is assigned to my GYRO on my vbar can you elaborate on your setup?

Thanks Again.
Rick

[Richard Rollins]

Ok,, Got it to work with MJ,s setup. Man that was really simple . I feel like a retard now.. hahaha.Thanks for all the replies. Its time to do some heli flying now. Hopefully see all  you at IRCHA .
Rick

[Mark Burberry]

Glad it worked out Rick.

Cheers,
Mark


Sent from my iPhone using Tapatalk 2