spacer

[yammillion308]

so I need spacer for the tail rail blads and they do not come in the kit is that right

[Jmiceli11]

You will need spacers. They come with the Rail tail blades, I haven't used another brand of blades in a while. I think Experience RC had them in stock. Worst case let me know and I will see if I have a set.

John

[Rodney Kirstine]

They come with the kit and they do not come with Rail tail blades.

You can also buy them separately.

http://mattbotos.com/store/index.php?main_page=product_info&products_id=1970

Sent from my MotoX via Tapatalk2

[yammillion308]

ok thx so much

[cyprusflyer]

Definitely comes with the kit, look out for what looks like thick aluminium washers.
On Fri I decided I needed to free up my tail blades a bit and it did get rid of a slow wag. I rubbed down with 320 grade wet & dry on glass, just a few strokes each side, then polished with 800 grade, no snagging at all now.
Before they felt tight without the nut done up, now I have some adjustment, made a big difference.

[Jmiceli11]

Rail tail blades use to come with spacers.

[Kevin Feil]

Use to, however not all Models require them, Meaning with the Demand of Rail Tails, different manufactures dont always need these. Matt switched gears and just incorporate these in Synergy Kits. Just not cost effective to supply even when Certain Models don't require them.

K

[yammillion308]

I got the spacer on the bird I was looking too hard

[yammillion308]

and thx you