June 15, 2024, 03:46:04 PM

Author Topic: E7SE tail kick during aileron tic tocs  (Read 4079 times)

flyalan

  • Guest
Re: E7SE tail kick during aileron tic tocs
« Reply #15 on: June 29, 2014, 08:11:20 AM »
Also look at your Gov gain. Try lowering it a bit.

Cheers
Alan

Sent from my SM-N900V using Tapatalk


Offline Greg Jackson

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1493
    • inner3.com
Re: E7SE tail kick during aileron tic tocs
« Reply #16 on: June 29, 2014, 09:26:21 PM »
Also did you try turning off the gov and see how things handle?
Synergy & Rail Field Representative
Team Scorpion||Team BK Servos||Team Pulse|

www.inner3.com

Offline Dan Minick

  • Field Representative
  • Sr. Member
  • ****
  • Posts: 362
  • Team FBL Rotors---Formerly Dyecocker1
Re: E7SE tail kick during aileron tic tocs
« Reply #17 on: June 30, 2014, 06:31:03 AM »
Im running the Kosmik gov. Its set to almost the lowest available. I didn't get a chance to fly the last weekend to try out the gains in the Vbar.  does anyone have a link to help better explain how to use I and P gains?
Dan Minick

Offline luleal26

  • Newbie
  • *
  • Posts: 2
Re: E7SE tail kick during aileron tic tocs
« Reply #18 on: July 01, 2014, 07:48:41 AM »
yes, Alan is very free and smooth, the size is standard that sends the manual, use Vbar unit, 106mm tail blades, I've tried everything, and I can not fix the problem, is locked, but when mecho syrup and dropped the stick him to varying slightly and this variation whats annoying me, what do I do?

Offline Matt Botos

  • Synergy Hero
  • **
  • Posts: 1573
    • Matt Botos
Re: E7SE tail kick during aileron tic tocs
« Reply #19 on: July 11, 2014, 01:10:03 PM »
Tail Kick on an electric helicopter is almost always one of the following things in this order.....

1. ESC Governor - this requires some tweaking based on motor/pinion
2. Tail pitch slider is not traveling 100% in both directions
3. FBL Unit is not programmed correctly
4. Tail Servo horn not the correct length
5. Ball links not sized correctly will make the servo "stick" and cause a delay in reaction time.

There are a few more but the above 5 are the usual culprits. As mentioned earlier, turning off the governor is always a good test.

Matt

Offline Scott Anderson

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 608
Re: E7SE tail kick during aileron tic tocs
« Reply #20 on: July 11, 2014, 01:38:04 PM »
Sorry someone already mentioned what I said
« Last Edit: July 11, 2014, 03:03:38 PM by andersons »
Field Representative