November 22, 2024, 05:13:21 PM
« previous next »
Pages: [1]

Author Topic: 4.5:1(optional)Slide Transmission all the way AFT??  (Read 935 times)

Offline Tom W.

  • Newbie
  • *
  • Posts: 24
4.5:1(optional)Slide Transmission all the way AFT??
« on: November 27, 2014, 01:37:58 PM »
Hi

How/where can I slide the transmission? I'm trying to fitt the 4.5:1 transmission, but have no problems to move the rotor head. Goes very strong. I guess the spur gears have no gap at all.

Thx
Thomas
Logged

Offline Chris Sexton

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2729
  • Admiral, There be whales here!
Re: 4.5:1(optional)Slide Transmission all the way AFT??
« Reply #1 on: November 27, 2014, 02:19:07 PM »
The 8 holes in the frame holding the tail transmission are elongated .657 mm. It's not much. Doesn't take much. As long as the gears are not  tight and mashing into each other your probably good.

Sent from my SM-N900V using Tapatalk
« Last Edit: November 27, 2014, 05:54:18 PM by Chris Sexton »
Logged
Chris Sexton
Synergy Factory Specialist / Rail Blades / Team Scorpion

Offline Tom W.

  • Newbie
  • *
  • Posts: 24
Re: 4.5:1(optional)Slide Transmission all the way AFT??
« Reply #2 on: November 27, 2014, 03:05:14 PM »
Thx Chris for your help. Works better now. Hope it turns easier after a flew flights. Very curious how it is to fly with 600mm blades.

Regards
Thomas
Logged
Pages: [1]
« previous next »