Gov sensor mounting

[Dave50w]

Hey guys just bought a N5C TT and I'm wondering how you guys are mounting the sensor to the bracket some pics be great thanks

[Rodney Kirstine]

Edit...  The pictures I added below are more informative.

[Dave50w]

I got how to fix it to the heli I'm just wanting to know how to fix the sensor eg double sided tape which doesn't seem all that permanent or maybe hot glue it just seems there is no real way to put a zip tie or clamp of some sort on there and the two hole don't really give you much as well I feel like I'm missing something

[Rodney Kirstine]

I'm using the two holes on my N5C and N7, with the Futaba sensor.

[Dave50w]

How are you using them could you post a pic or two please

[Rodney Kirstine]

I hope these help.  With everything being black, it's hard to get a decent picture since there's no contrast.

[Dave50w]

Thanks very much for the pics I see now I don't have the bracket that bolted to the frame bracket I only have the sensor cord and the bracket that came with the heli not sure where to get this bracket from id post a pic but not sure how

[Rodney Kirstine]

What sensor is it?

[Dave50w]

Rev lock 30 sensor, was on my vibe but I stopped using the rev lock when I went to fbl vbar rev lock box came with some steel brackets that are no were near close to it

[Rodney Kirstine]

Ross's solution, below, is a much better option.

[Dave50w]

I will make one I thought I was missing something I'm going to pull the bracket off the old heli and mod it to fit, heres hoping the holes line up thanks for the pics

[Ross Lawton]

Hi Dave50w,

What you will need is the Synergy/Trex600N governor sensor mounting bracket, this was designed to work with the CSM Rev-Lock sensor on the original N9 and works perfectly with the N5 if using the plastic mounting bracket on the outside of the frames.

I use this bracket myself with other sensors, but the bracket does require a little trimming as these sensors need the actual sensor to be bent over the end of the bracket and secured in place.

The part number for the bracket is: CSMRL19

http://www.fast-lad.co.uk/store/synergy/_600n_govenor_bracket_csmrl19-p-692.html

Hope this helps, any questions give us a shout.
Cheers,
Ross

[Dave50w]

Thanks Ross I ended up using the bracket off the vibe 50 with some help from the dremil and the holes lined up perfect I'm much happier with it now, how do I post a pic on here? And thanks all for the help guys

[Rodney Kirstine]

Normally, I upload the picture to something like Google+, Picasa, etc. and then use the "insert image" button here on this forum and put in the URL to the picture.