Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email
?
Home
Help
Search
Login
Register
November 21, 2024, 03:25:41 PM
Synergy Tech Support
»
Synergy Electric Helicopters
»
Synergy E7SE
»
Low Head speed and Spirit FBL
« previous
next »
Print
Pages: [
1
]
Author
Topic: Low Head speed and Spirit FBL (Read 1524 times)
johncclayton
Newbie
Posts: 28
Low Head speed and Spirit FBL
«
on:
June 20, 2015, 02:58:23 AM »
Hi
Is anyone flying low head speed on an E7(SE) and also using a Spirit FBL? If so I'd be keen on hearing what FBL settings you are using as well as the size of main/tail blades.
Thanks
--John Clayton
Logged
--
John Clayton
If it aint broke, maybe tinker with it.
johncclayton
Newbie
Posts: 28
Re: Low Head speed and Spirit FBL
«
Reply #1 on:
June 22, 2015, 05:56:22 AM »
I added revomix 8, and that helped settle the tail down a lot but it's still not perfect as the tail can still be kicked out a little on a full punch out. Running 1050 head speed with 116 tails along with Jive 120 HV.
Logged
--
John Clayton
If it aint broke, maybe tinker with it.
okanor
Full Member
Posts: 156
Re: Low Head speed and Spirit FBL
«
Reply #2 on:
June 22, 2015, 10:13:10 AM »
I run an ikon and 4.9:1 tail ratio @ 1200/1350/1500 head speed. My tail gain is about 20 points higher @ 1200 than at 1500. I am running 696 mains and 106 tails. With this setup (after some time tuning) I can do rock solid tail slides @ 1200 head speed. When I was running 1050-1100 head speed I had even more gain in the tail. I also spent quite a bit of time tuning my gov gain so the RPM was a consistent as it could be before I began tuning the tail. I haven't heard of the spirit FBL unit but I hope this helps.
Logged
Low and Slow
Print
Pages: [
1
]
« previous
next »
Synergy Tech Support
»
Synergy Electric Helicopters
»
Synergy E7SE
»
Low Head speed and Spirit FBL