November 21, 2024, 02:35:35 PM
« previous next »
Pages: [1]

Author Topic: Motor Shaft Length  (Read 1868 times)

Offline Ding0

  • Newbie
  • *
  • Posts: 40
Motor Shaft Length
« on: October 01, 2015, 11:38:30 PM »
Guys and gals, I'm in the process of building my kit and I'm just wondering if this is correct - I have a hunch the shaft should be shorter. It's extending 15.4mm beyond the bearing - is this OK?
« Last Edit: October 01, 2015, 11:40:25 PM by Ding0 »
Logged

Offline cml001

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 684
Re: Motor Shaft Length
« Reply #1 on: October 02, 2015, 04:33:07 AM »
So long as the battery's fit, it ok... However.. If u crash.. That's a spear into ur pack potentially.. I cut my shaft so that it passed thru the bearing about 1-2mm.. I forgot the exact length. Use a ziplock sandwich bag to put ur motor in with the shaft poking thru the bag prior to cutting to keep debris out of ur motor.
« Last Edit: October 02, 2015, 04:45:55 AM by cml001 »
Logged
Clay
I can fly helicopters... Upside down!

Offline Chris Sexton

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2729
  • Admiral, There be whales here!
Re: Motor Shaft Length
« Reply #2 on: October 02, 2015, 10:07:35 AM »
Agreed, I would highly recommend cutting that off. In a crash you are asking for Pack damage.

I use a similar method as Clay, using a zip-lock bag to keep the shavings out of the motor magnets.
Logged
Chris Sexton
Synergy Factory Specialist / Rail Blades / Team Scorpion

Offline Ding0

  • Newbie
  • *
  • Posts: 40
Re: Motor Shaft Length
« Reply #3 on: October 02, 2015, 11:29:41 AM »
Excellent, thank you!!!
Logged

Offline Ding0

  • Newbie
  • *
  • Posts: 40
Re: Motor Shaft Length
« Reply #4 on: October 03, 2015, 11:26:41 AM »
For Reference
Logged
Pages: [1]
« previous next »