November 23, 2024, 08:54:12 AM
« previous next »
Pages: 1 2 [3]

Author Topic: clutch/liner gap from the factory  (Read 8039 times)

Offline jmdanna

  • Newbie
  • *
  • Posts: 22
Re: clutch/liner gap from the factory
« Reply #30 on: July 27, 2016, 11:24:26 AM »
I haven't changed the settings much yet. Mid still at 1 1/2 and high 2 clicks lean from 1 3/4.

I have the Funtech B320
Logged

Offline jmdanna

  • Newbie
  • *
  • Posts: 22
Re: clutch/liner gap from the factory
« Reply #31 on: July 27, 2016, 02:16:25 PM »
www.youtube.com/watch?v=rqyEktJA9-g

Flight from today, same settings. So overall it felt great, the only lack of power I felt was during tic tocs. Is that because of rich high end or rich mid range?
Logged

Offline FlamingHomer

  • Newbie
  • *
  • Posts: 43
Re: clutch/liner gap from the factory
« Reply #32 on: July 27, 2016, 02:45:19 PM »
Hmm i dont use governor for the needle settings and for general flying.
But first lean the high needle and
 check again.
Logged

Offline peteowlsmith

  • Member
  • **
  • Posts: 74
Re: clutch/liner gap from the factory
« Reply #33 on: July 28, 2016, 07:27:41 AM »
Nice flying!    There is something "real" about watching a nitro heli fly --- love the sound / smell / visual of the smoke  8)
Logged

Offline Gabriel Sandoval

  • Field Representative
  • Sr. Member
  • ****
  • Posts: 322
  • If your not crashin' your not trying hard enough..
    • Midwest Heli Boyz
Re: clutch/liner gap from the factory
« Reply #34 on: July 28, 2016, 08:24:11 AM »
Deleted
« Last Edit: July 28, 2016, 08:29:28 AM by GabrielSandoval »
Logged
Team Synergy
Team Scorpion
Team Dee Force Aviation
Team YS Performance USA
Looking for a fuel Sponsor

Offline rmarlan

  • Newbie
  • *
  • Posts: 15
Re: clutch/liner gap from the factory
« Reply #35 on: August 16, 2016, 08:24:16 AM »
According to the OS Manual for a HZR - initial settings Mid 1 High 2. For an HZ - Mid 2 High 2.


Sent from my iPhone using Tapatalk
Logged
Pages: 1 2 [3]
« previous next »