November 22, 2024, 07:51:12 AM
« previous next »
Pages: [1]

Author Topic: BD 3SX FBL placement on the N5C  (Read 2313 times)

Offline HelisRock!

  • Newbie
  • *
  • Posts: 12
BD 3SX FBL placement on the N5C
« on: January 13, 2017, 11:20:15 PM »
Hi Guys,

I'm new to Synergy, started building a new N5C.  I'm going to use a Bavarian Demon 3SX as my FBL, where can I mount it?  The frame is so narrow it won't fit inside, so the only place I can envision is on top of the servo tray.  But since the connectors are on top, I don't know that there's room under the canopy.  Anyone else flying the Demon?
« Last Edit: January 14, 2017, 12:34:47 AM by HelisRock! »
Logged

Offline Mike Spano

  • Synergy Hero
  • **
  • Posts: 1038
Re: BD 3SX FBL placement on the N5C
« Reply #1 on: January 16, 2017, 02:59:57 PM »
that is the only place to put it man. it will be ok though, just put it closer to the rear of the servo block and the canopy should have plenty of room.
Logged
Team Synergy
Rail Blades
TRM Power
Team Byron Fuels
MKS Servos

Offline HelisRock!

  • Newbie
  • *
  • Posts: 12
Re: BD 3SX FBL placement on the N5C
« Reply #2 on: January 19, 2017, 12:08:40 PM »
Makes sense, thanks very much Mike!

Logged

Offline jayster10

  • Member
  • **
  • Posts: 65
Re: BD 3SX FBL placement on the N5C
« Reply #3 on: March 24, 2017, 04:33:43 PM »
Quote from: HelisRock! on January 13, 2017, 11:20:15 PM
Hi Guys,

I'm new to Synergy, started building a new N5C.  I'm going to use a Bavarian Demon 3SX as my FBL, where can I mount it?  The frame is so narrow it won't fit inside, so the only place I can envision is on top of the servo tray.  But since the connectors are on top, I don't know that there's room under the canopy.  Anyone else flying the Demon?
Hi there,

I'm fairly new to flying but my 3SX has been performing perfectly where it's mounted. No issues with vibration or interference. No issue with canopy fitting.

See pics.

Jay


Sent from my iPad using Tapatalk
Logged

Offline HelisRock!

  • Newbie
  • *
  • Posts: 12
Re: BD 3SX FBL placement on the N5C
« Reply #4 on: March 25, 2017, 03:39:42 PM »
Hi Jay, thanks for the pic.  That's a lot further forward than I would have expected.  I ended up mounting mine at the back of the servo tray, where you have your RX, and even put the connectors at the rear.  Good to know there's so much room under there!
Logged

Offline jayster10

  • Member
  • **
  • Posts: 65
Re: BD 3SX FBL placement on the N5C
« Reply #5 on: March 25, 2017, 09:37:31 PM »
Yeah, had to place it there to have the clearance for the receiver and the glow plug igniter/voltage regulator stack to clear the canopy and to keep it as far away from vibration of the gears/drive shaft.


Sent from my iPad using Tapatalk
Logged

Offline Kevin Feil

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2100
Re: BD 3SX FBL placement on the N5C
« Reply #6 on: March 26, 2017, 10:45:01 AM »
Congrats on the new build ! Please let us know how you like your new machine, just a reminder, please look through all the tips and tricks section to make sure you have all bases covered. Again congrats..

K
Logged
Team Synergy
Team Futaba
Team Scorpion
Team Morgan Fuels

Offline alan

  • Sr. Member
  • ****
  • Posts: 275
  • Team Helilids
Re: BD 3SX FBL placement on the N5C
« Reply #7 on: April 02, 2017, 05:09:32 AM »
Nicely done Jay.
I fly Demons as well. About to build a fresh N5C with the Axon installed. It will be nice not to have to use a mulitigov :-)

Cheers
Alan


Sent from my iPhone using Tapatalk
Logged
Team Helilids RC

Offline HelisRock!

  • Newbie
  • *
  • Posts: 12
Re: BD 3SX FBL placement on the N5C
« Reply #8 on: April 06, 2017, 09:35:24 PM »
Quote from: Kevin Feil on March 26, 2017, 10:45:01 AM
Congrats on the new build ! Please let us know how you like your new machine, just a reminder, please look through all the tips and tricks section to make sure you have all bases covered. Again congrats..

K

Thanks Kevin!  The build has been delayed by work and weather, so I'll check out the tips and tricks.
Logged
Pages: [1]
« previous next »