December 04, 2024, 08:42:28 PM
« previous next »
Pages: [1]

Author Topic: Hello from Mobile  (Read 2447 times)

Offline japhia42

  • Newbie
  • *
  • Posts: 7
Hello from Mobile
« on: July 30, 2017, 12:12:50 AM »
Hello from Mobile Alabama. Very excited to be a part of this community! I have the E5 being delivered Friday! Need recommendations on an esc and motor please!
Logged

Offline steffgiguere

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1373
Re: Hello from Mobile
« Reply #1 on: July 30, 2017, 06:16:22 AM »
Welcome, are you going to run it on 6S or 12S?
Logged
Team Synergy, Canada

Offline japhia42

  • Newbie
  • *
  • Posts: 7
Re: Hello from Mobile
« Reply #2 on: July 30, 2017, 08:50:42 AM »
I'm thinking 6s
Logged

Offline dpelletier

  • Full Member
  • ***
  • Posts: 198
Re: Hello from Mobile
« Reply #3 on: July 30, 2017, 09:41:11 AM »
I'm using: Scorpion HKIII-4025-1100, 6S (4400 & 4500mah) Castle EDGE 120HV, Castle Super BEC(20 Amp)

Fly sports big sky. Around 5 minutes.
Logged
Dany -  Not on any Team  :( maybe some day :)
Synergy E5 CGY-750 (my favorite heli)
Furion 6 Flybarless, Skookum 720
Beam E4(v1) FBL, Skookum 540
Futaba 14sg

Inching my way out of being a newbie...

Offline japhia42

  • Newbie
  • *
  • Posts: 7
Re: Hello from Mobile
« Reply #4 on: July 30, 2017, 01:01:36 PM »
I'm liking that 4025 more and more as the motor of choice for this build. nice choice of esc too!
Logged

Offline curmudgeon

  • Synergy Veteran
  • *
  • Posts: 578
Re: Hello from Mobile
« Reply #5 on: July 30, 2017, 08:51:36 PM »
I use a KDE600XF-1100-G3 motor with a Kontronik Jive Pro 120+ HV ESC.  This motor/ESC combination works great on both 6S and 7S.  If I were to build another E5 and planned to run it as 6S (not 7S), I would strongly consider the Scorpion Tribunus 120A ESC.
Logged

Offline cml001

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 684
Re: Hello from Mobile
« Reply #6 on: July 31, 2017, 04:43:57 AM »
Welcome! I run mine in the 606 configuration with the KDE 600XF 1100kv with the Castle Edge 120HV & BEC PRO.. if u plan to run it as a 556 or a 600 on 6-8s.. this works fantastic! Many choices for set up with this bird in configuration & equipment.. it's a great bird! Enjoy ur build!
Logged
Clay
I can fly helicopters... Upside down!

Offline japhia42

  • Newbie
  • *
  • Posts: 7
Re: Hello from Mobile
« Reply #7 on: July 31, 2017, 06:58:58 PM »
I'm liking the 6s setup, now just a toss up on the esc. I've not heard a single bad thing about this bird! Oh, need directions to where i can get the swash leveler or has anyone found one that'll work with it?
Logged

Offline cml001

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 684
Re: Hello from Mobile
« Reply #8 on: July 31, 2017, 07:18:38 PM »
Any leveler for a 10mm shaft will do.. I have an Align, FBL Rotors, & a RD Lohr's swash leveler... even used the zip tie trick.. all work fine.
Logged
Clay
I can fly helicopters... Upside down!

Offline japhia42

  • Newbie
  • *
  • Posts: 7
Re: Hello from Mobile
« Reply #9 on: August 01, 2017, 06:37:37 PM »
Awesome! I've got one for my Gaui, guess I'll go on and get one for this one.
Logged

Offline japhia42

  • Newbie
  • *
  • Posts: 7
Re: Hello from Mobile
« Reply #10 on: August 01, 2017, 08:46:57 PM »
Also looking at the Scorpion Tribunis 06-120a esc and the 4020 1100kv motor.
Logged

Offline curmudgeon

  • Synergy Veteran
  • *
  • Posts: 578
Re: Hello from Mobile
« Reply #11 on: August 01, 2017, 09:53:50 PM »
The motor size recommended on the manual for the 550 size configuration is the Scorpion 4025-1100kv.  The smaller Scorpion 4020-1100kv motor is rated for 90A peak current (5 seconds).  Depending on your flying style the smaller 4020-1100kv may work well, but understand that as you start pushing this helicopter swinging 556 blades on 6S, your peak current may be somewhere between 165A and 210A for brief periods.  The larger 4025-1100kv motor may be the more optimal option of these two motors.












Scorpion HKIII-4020-1100kv motor specifications:









Scorpion HKIII-4025-1100kv motor specifications:




Logged

Offline japhia42

  • Newbie
  • *
  • Posts: 7
Re: Hello from Mobile
« Reply #12 on: August 02, 2017, 06:24:21 PM »
Yea that 4020 was a typo on my part, I did mean 4025 1100 kv and as yet haven't found anything I like better. Going to go with Tesla servos, can get a good deal on them.
Logged
Pages: [1]
« previous next »