Synergy E5 swash leveler

[Helikid42]

Does any one know what 10mm swash leveler is available for this heli? Thank you for any responses!

[Richard Rollins]

There are several available . I use the Align 10mm leveler!!!

[Rodney Kirstine]

I use the Soko Heli Tool.

[Wolf51]

Soko heli tool.
Great for an accurate setup, I've used mine for a 360 through 766.

Sent from my GT-I9507 using Tapatalk

[Justin Spicer]

I use the 3d printed one from 3dheliupgrades.com

[Mark Dean]

If you are looking for ease of use, FBL rotors makes a nice one also. I’ve used several and the SOKO is by far the most advanced. 

[Danny Dugger]

If you are looking for ease of use, FBL rotors makes a nice one also. I’ve used several and the SOKO is by far the most advanced.

The FBL Rotors leveler doesn't work with the new style swash. The feature Ralph put on his leveler to set the old swash follower height hits the inner swash on the new design. It requires a decent amount of modification with a mill or cutting tool.

[cml001]

The align works well.. has an insert for multiple shaft diameters. Another good one is  “rd lohr’s” from clearly superior. I’ve been using the rd lohr lately because u can keep the head on while u use it.
http://rdlohr.com/

[Mark Dean]

The FBL Rotors leveler doesn't work with the new style swash. The feature Ralph put on his leveler to set the old swash follower height hits the inner swash on the new design. It requires a decent amount of modification with a mill or cutting tool

Thanks Danny, very good point. I didn't even think about the new model swash.

[alan]

Goblin 500 swash leveler also works.



Sent from my iPhone using Tapatalk

[Chuck Bole]

 Look at a Trueblood swash leveler.

http://www.truebloodengineering.com/levelers.html