November 23, 2024, 06:21:17 AM
« previous next »
Pages: [1]

Author Topic: Talon 90  (Read 2248 times)

Offline turner2

  • Member
  • **
  • Posts: 84
Talon 90
« on: December 11, 2017, 08:46:23 AM »
Anyone experienced BEC failures on the Talon 90 sending full voltage to the electronics and burning them up? I have only read about this.
Logged

Offline Chris Sexton

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2729
  • Admiral, There be whales here!
Re: Talon 90
« Reply #1 on: December 11, 2017, 08:53:11 AM »
I have ran the Talon series on numerous helis, never had an issue.  It's a proven product when used in the correct application.
Logged
Chris Sexton
Synergy Factory Specialist / Rail Blades / Team Scorpion

Offline Rob Cherry

  • Factory Pilot
  • Sr. Member
  • *****
  • Posts: 341
Re: Talon 90
« Reply #2 on: December 11, 2017, 11:03:11 AM »
None that I know of.
Logged
Synergy Factory Pilot

Offline dhoskins26

  • Newbie
  • *
  • Posts: 39
Re: Talon 90
« Reply #3 on: December 11, 2017, 08:01:41 PM »
Hey, I talked to Laura, and she told me that in the repair department they rarely see the talons come back. They are a good and sturdy unit, so that may have just been a faulty one. She said that she rarely hears anyone call in with issues with them as well. There is one airplane motor that the talon 90 does not like to work with and it is an extreme flight motor, but couldn't remember which one. It is hard to say without seeing the unit what exactly happened.
Logged

Offline TheBum

  • Newbie
  • *
  • Posts: 43
Re: Talon 90
« Reply #4 on: December 11, 2017, 11:13:07 PM »
CC had the same issue with their BEC Pro at one time, but it was usually when running from a 12S input. I hope that issue isn’t coming back.
Logged

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: Talon 90
« Reply #5 on: December 16, 2017, 05:06:27 PM »
I run the Talon 90 in my 516 and the Talon 120HV in my E5ss with no issues on either one.  I've had the 120HV in my super stretch for a couple of years now, on 12S, without a hiccup.
Logged
Rodney

Team Synergy

Offline Cliff Chmiel

  • Synergy Veteran
  • *
  • Posts: 588
  • Cliff
Re: Talon 90
« Reply #6 on: December 19, 2017, 10:10:30 AM »
Mine craped out on the 3rd flight, I need  to send it back in, had another one, been flying great, about 40 flights
Logged
Cliff

Offline Cliff Chmiel

  • Synergy Veteran
  • *
  • Posts: 588
  • Cliff
Re: Talon 90
« Reply #7 on: March 02, 2018, 03:06:09 PM »
I just had another one crap out on my outlaw.
Logged
Cliff

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: Talon 90
« Reply #8 on: March 04, 2018, 08:25:39 PM »
Damn, not good luck at all!  :o
Logged
Rodney

Team Synergy

Offline cml001

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 684
Re: Talon 90
« Reply #9 on: March 14, 2018, 07:10:47 AM »
What’s ur set up?... that’s very odd!
Logged
Clay
I can fly helicopters... Upside down!

Offline Cliff Chmiel

  • Synergy Veteran
  • *
  • Posts: 588
  • Cliff
Re: Talon 90
« Reply #10 on: March 15, 2018, 12:47:58 PM »
The one my 516 is holding up, first stopped after 3rd flight, this one now has about 100 flights. My one in the EF outlaw craped out after 50 flights, I know I'm pushing it very hard, outlaw speed is everything, so far 156mph , have speed tube on it tell the speed just like a real plank.
Logged
Cliff

Offline Cliff Chmiel

  • Synergy Veteran
  • *
  • Posts: 588
  • Cliff
Re: Talon 90
« Reply #11 on: March 15, 2018, 12:49:17 PM »
Sent them off to castle, have not hear back yet.
Logged
Cliff
Pages: [1]
« previous next »