November 21, 2024, 05:20:35 PM
« previous next »
Pages: 1 [2]

Author Topic: Blade Shims Required  (Read 7462 times)

Offline NKY Heli Guy

  • Full Member
  • ***
  • Posts: 164
Blade Shims Required
« Reply #15 on: January 07, 2013, 07:59:55 AM »
Ok thanks looks like that site is our of the shims. Helidirect has 1mm shims with 5mm hole would that make a detrimental difference?


Sent from my iPhone using Tapatalk
Logged

Offline NKY Heli Guy

  • Full Member
  • ***
  • Posts: 164
Blade Shims Required
« Reply #16 on: January 07, 2013, 09:41:56 AM »
Scratch that they are different. I should have ordered earlier I thought I had seen them in the kit but was mistaken. Sucks because its going to be 60 degrees on Friday and was going to maiden :(


Sent from my iPhone using Tapatalk
Logged

Offline RichL

  • Synergy Veteran
  • *
  • Posts: 802
Re: Blade Shims Required
« Reply #17 on: January 07, 2013, 05:35:13 PM »
You might check out this link and give theses guys a call.  I have searched every hobby store I have ever done business with and all of them are out of stock.  www.amainhobbies.com/product_info.php/cPath/2_375_1499_1799/products_id/195919/n/Miniature-Aircraft-1mm-Thick-Main-Blade-Spacer-Set-4


Rich
Logged
Synergy E5: Scorpion HKIII 4025-1100, CC ICE2 120HV, Rail 556/96, V-Bar Silverline

Synergy E7: Quantum 4530-500, CC ICE2 160HV, Rail 716/116, V-Bar Silverline

flyalan

  • Guest
Re: Blade Shims Required
« Reply #18 on: January 07, 2013, 05:48:33 PM »
I have NKYheliguy covered.  In the mail in the morning.  Getting kinda thin spacers myself though.  Fortunately I was putting some 716's on my E7 so I had extra.

Cheers
Alan
« Last Edit: January 07, 2013, 06:48:52 PM by flyalan »
Logged

Offline NKY Heli Guy

  • Full Member
  • ***
  • Posts: 164
Blade Shims Required
« Reply #19 on: January 07, 2013, 06:12:20 PM »
Thanks guys!!


Sent from my iPhone using Tapatalk
Logged

Offline HeliDave

  • Newbie
  • *
  • Posts: 2
Re: Blade Shims Required need 4 556 shims please 1mm thick x 22mm wide 4mm hole
« Reply #20 on: April 02, 2018, 07:30:55 PM »
Hi Guys,
Just finished building my 2nd Synergy E5... love this bird and all the flexibility and fun it brings!
However, I can not find the blade shims that are 1mm thick x 22mm wide and have a 4mm hole in the center.
I would be more than happy to pay for a set of 4 of these if anyone has them to spare please and thanks.
Any help appreciated!
Thanks Dave (HeliDave)
Logged

Offline FrankFuss

  • Newbie
  • *
  • Posts: 28
Re: Blade Shims Required need 4 556 shims please 1mm thick x 22mm wide 4mm hole
« Reply #21 on: April 03, 2018, 01:57:19 PM »
Quote from: HeliDave on April 02, 2018, 07:30:55 PM
Hi Guys,
Just finished building my 2nd Synergy E5... love this bird and all the flexibility and fun it brings!
However, I can not find the blade shims that are 1mm thick x 22mm wide and have a 4mm hole in the center.
I would be more than happy to pay for a set of 4 of these if anyone has them to spare please and thanks.
Any help appreciated!
Thanks Dave (HeliDave)
I don't know, but these might work:

https://www.onlyfinehelis.com/Rail-1mm-Blade-Shim-Kit_p_5761.html
Logged

Offline HeliDave

  • Newbie
  • *
  • Posts: 2
Re: Blade Shims Required
« Reply #22 on: April 03, 2018, 06:28:22 PM »
Hi Frank,
Thanks so much for the tip!
I just placed the order for the last pack of 4 they had! 
Appreciate the reference sir!
Thanks!
Dave  :)
« Last Edit: April 03, 2018, 06:44:24 PM by HeliDave »
Logged
Pages: 1 [2]
« previous next »