November 23, 2024, 02:47:02 AM

Author Topic: inserting auto hub assembly to main gear  (Read 1845 times)

Offline panz

  • Newbie
  • *
  • Posts: 22
inserting auto hub assembly to main gear
« on: July 14, 2012, 07:49:20 PM »
Hi Guys,

I need to change my main gear and am having issue with inserting the auto hub into the main gear, it's pretty tight and I can't seem to get it into the hole. any pointers? cheers


« Last Edit: July 14, 2012, 08:42:20 PM by panz »

Offline Kevin Feil

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2100
Re: inserting auto hub assembly to main gear
« Reply #1 on: July 14, 2012, 10:07:51 PM »
put the auto hub in the freezer. make sure you are centered when installing it..., heat the gear up with a hair dryer, "Of Course Not to the point of Deforming or melting!!!!   also might even take a piece of 2200 sand paper and lightly sand the inner hole of the main gear, then follow the above steps...


Kevin
Team Synergy
Team Futaba
Team Scorpion
Team Morgan Fuels

Offline panz

  • Newbie
  • *
  • Posts: 22
Re: inserting auto hub assembly to main gear
« Reply #2 on: July 15, 2012, 04:37:52 AM »
Cheers. Thanks Kevin :)

Offline Kevin Feil

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2100
Re: inserting auto hub assembly to main gear
« Reply #3 on: July 16, 2012, 05:07:37 PM »
 My Pleasure, Let us know how it works out. ;)

Kevin
Team Synergy
Team Futaba
Team Scorpion
Team Morgan Fuels