October 31, 2024, 07:14:19 PM

Author Topic: Waiting list..  (Read 2858 times)

Offline Jabird

  • Newbie
  • *
  • Posts: 21
  • Started flying a GMP Cricket in 1984. Still Going!
Waiting list..
« on: November 23, 2012, 06:53:12 AM »
Well I went ahead and put myself on the waiting list for the E5 kit.. I gots the jitters already dreaming about it zippin through the sky...

This is my Xmas,New Years and birthday present all in one.

Still will need servos, just gonna run it on a 6s setup. Should be pretty S-A-WEEEET
Synergy N556, pbiii, 55hzr, xpert, ikon
In the past,
Synergy N5c, CGY750, Futaba 12z, 55hz
Blade 130x ,Cricket, Concept30 dx, SRX, Ergo, Raptor30, 50, and 60, Xcell pro II, Xcell CT, Xcell SE 99,XL Fury pro, XL fury extreme, Robbe milli, Trex 250, 450, 500, Trex 600, shogun, helimax 40

Offline Brandon Bartolomucci

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1007
Waiting list..
« Reply #1 on: November 23, 2012, 06:58:03 AM »
Awesome! I'll be running mine on 6s as well. Can't wait.


Regards,
Brandon Bartolomucci
Sent from my iPhone
Regards,
Brandon Bartolomucci
Team Synergy; Scorpion; & Bavarian Demon

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: Waiting list..
« Reply #2 on: November 23, 2012, 08:52:33 AM »
Nice!  Mine will be 6S, as well.
Rodney

Team Synergy

Offline Ktsn

  • Member
  • **
  • Posts: 67
Re: Waiting list..
« Reply #3 on: November 23, 2012, 04:23:58 PM »
Same, mine will be 6s with scorpion 4025-1100 kv !

Offline Greg Jackson

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1493
    • inner3.com
Re: Waiting list..
« Reply #4 on: November 23, 2012, 09:09:41 PM »
Lol, looks like a lot of people will run on 6s
Synergy & Rail Field Representative
Team Scorpion||Team BK Servos||Team Pulse|

www.inner3.com

Offline Jean-Luc Bolduc

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 614
Re: Waiting list..
« Reply #5 on: November 24, 2012, 10:47:29 AM »
12s 3300 on my stretched.
Team Synergy

Offline BrianE

  • Field Representative
  • Full Member
  • ****
  • Posts: 191
Re: Waiting list..
« Reply #6 on: November 25, 2012, 08:04:02 AM »
12s 3300 on my stretched.

That's what I'm planning too.  Can't wait 8)
E7SE, Sliverline VBar, Edge 160HVf, Scorpion HKIII 4530, Futaba BLS, OptiGuard and BEC Guards

E5-626, Vbar NEO, Edge 120HV, Scorpion HKIII 4035, MKS 950/980 OptiGuard and BEC Guards

Offline Ktsn

  • Member
  • **
  • Posts: 67
Re: Waiting list..
« Reply #7 on: November 25, 2012, 04:56:36 PM »
I have some 3500mAh 6S stick that weight 1050 grs when I put them in series.
What is the ideal weight for a good CoG when putting them in the rear lipo Room ?

Offline Darren Lee

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 620
Re: Waiting list..
« Reply #8 on: November 25, 2012, 06:19:00 PM »
I think the frame will accomodate quite a range of battery weights.  My 12s 4000 sticks at 1200-1300g balance when positioned almost all the way back.  Anything lighter will simply need to be moved forward.
Team Synergy / Rail Blades / Morgan Fuel

Offline Billigan

  • Newbie
  • *
  • Posts: 4
    • BC Graphics, Screen Printing & Embroidery
Re: Waiting list..
« Reply #9 on: November 27, 2012, 10:08:31 PM »
Mine will be a stretched and cut, running 12s with two 3300 pulse ultra's packs. Powered by a Scorpion HKIII 4035 560kv motor and a Castle HV2/120 & Pro BEC. An AR7300BX controller with Savox servos.
"Married with helicopters"

Offline Jean-Luc Bolduc

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 614
Re: Waiting list..
« Reply #10 on: November 30, 2012, 07:38:49 PM »
12s 3300 will be a good light setup. I'm also using 4000's and as mentioned they cg fine. Matt thought of every detail.
Can't get much better than this.
Team Synergy