November 21, 2024, 04:26:38 PM
« previous next »
Pages: [1] 2

Author Topic: Question to Matt about E5 frames.  (Read 4957 times)

Offline Jabird

  • Newbie
  • *
  • Posts: 21
  • Started flying a GMP Cricket in 1984. Still Going!
Question to Matt about E5 frames.
« on: November 17, 2012, 03:26:01 AM »
Will there be a future plan of making G-10 frames, or the pseudo-carbon twill? I like CF don't get me wrong, but g-10 is alot cheaper and not much weaker. No worries about fuel proofing since an "e" machine. What are your thoughts?
Logged
Synergy N556, pbiii, 55hzr, xpert, ikon
In the past,
Synergy N5c, CGY750, Futaba 12z, 55hz
Blade 130x ,Cricket, Concept30 dx, SRX, Ergo, Raptor30, 50, and 60, Xcell pro II, Xcell CT, Xcell SE 99,XL Fury pro, XL fury extreme, Robbe milli, Trex 250, 450, 500, Trex 600, shogun, helimax 40

Offline Brandon Bartolomucci

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1007
Question to Matt about E5 frames.
« Reply #1 on: November 17, 2012, 05:38:50 AM »
I'm sure Matt will chime in but I wanted to mention that the carbon on the Synergy birds is VERY strong. There are a few posts around where crashes have happened, even a few on the same bird, and the frames stay completely in tact. I don't think you'll have anything to worry about with the carbon on the frame.


Regards,
Brandon Bartolomucci
Sent from my iPhone
« Last Edit: November 17, 2012, 09:05:09 AM by Brandon Bartolomucci »
Logged
Regards,
Brandon Bartolomucci
Team Synergy; Scorpion; & Bavarian Demon

Offline Chris Sexton

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2729
  • Admiral, There be whales here!
Question to Matt about E5 frames.
« Reply #2 on: November 17, 2012, 06:13:06 AM »
Hello!

I wanted to second what Brandon mentioned. My E7 has found the trees and the dirty several times. Sill on the original frames!

As for the G10. Most of the G10 frames I have seen are done by aftermarket manufactures. I know Fusuno makes G10 frames for several birds.

I don't think you will see any factory G10 frames as the carbon is better in the long run.


Sent from my iPhone using Tapatalk
Logged
Chris Sexton
Synergy Factory Specialist / Rail Blades / Team Scorpion

Offline Jean-Luc Bolduc

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 614
Re: Question to Matt about E5 frames.
« Reply #3 on: November 18, 2012, 06:01:38 AM »
I've seen a few crashes with the E7 frame remaining intact, and one of them was a contender for best crash of the year !!

The E5 frame is built the same way.
Logged
Team Synergy

Offline Matt Botos

  • Synergy Hero
  • **
  • Posts: 1573
    • Matt Botos
Re: Question to Matt about E5 frames.
« Reply #4 on: November 22, 2012, 01:45:56 AM »
Hello Jabird,

I left the G10 material due to poor performance in both flight and crash resistance. I understand the desire for a more budget helicopter, I will keep an eye out for material that is similar to carbon but more along the cost of G10.

Thanks,

Matt
Logged

Offline Kevin Feil

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2100
Re: Question to Matt about E5 frames.
« Reply #5 on: November 22, 2012, 08:51:33 PM »
All I can say is if I can't Break them in a crash "You" wont break them.. lol  I ran an e7 in on it's head wide open and turned the lower bearing block into a "V", and the frame never cracked/distorted or anything.. Matt has spent Equal amounts of time in sourcing the very best materials to better support his Designs... "If it ain't broke, Don't fix it is my opinion.. ;)


Best Regards,

Kevin
Logged
Team Synergy
Team Futaba
Team Scorpion
Team Morgan Fuels

Offline Greg Jackson

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1493
    • inner3.com
Re: Question to Matt about E5 frames.
« Reply #6 on: December 09, 2012, 10:58:31 AM »
I love the look of carbon in the sun, even have it on my car!  Plus it is strong and light.
Logged
Synergy & Rail Field Representative
Team Scorpion||Team BK Servos||Team Pulse|

www.inner3.com

Offline Ktsn

  • Member
  • **
  • Posts: 67
Re: Question to Matt about E5 frames.
« Reply #7 on: December 11, 2012, 03:36:34 PM »
Question for luckies builder,was it necessary to sand the carbon frame egdes ?
Logged

Offline RichL

  • Synergy Veteran
  • *
  • Posts: 802
Re: Question to Matt about E5 frames.
« Reply #8 on: December 11, 2012, 03:40:28 PM »
Necessary?  Will it fly without doing it? Yes.  Will it eat your wiring if you don't? Yes.  Yea brother, they need to be sanded.  15 min tops using 600 grit cloth backed paper.
« Last Edit: December 11, 2012, 03:42:35 PM by RichL »
Logged
Synergy E5: Scorpion HKIII 4025-1100, CC ICE2 120HV, Rail 556/96, V-Bar Silverline

Synergy E7: Quantum 4530-500, CC ICE2 160HV, Rail 716/116, V-Bar Silverline

Offline Ktsn

  • Member
  • **
  • Posts: 67
Re: Question to Matt about E5 frames.
« Reply #9 on: December 11, 2012, 03:43:06 PM »
Okay !
It seems that I'll take my time to do my best build ever !
Logged

Offline RichL

  • Synergy Veteran
  • *
  • Posts: 802
Re: Question to Matt about E5 frames.
« Reply #10 on: December 11, 2012, 03:46:44 PM »
Quote from: Ktsn on December 11, 2012, 03:43:06 PM
Okay !
It seems that I'll take my time to do my best build ever !
Don't forget the edges of the anti-rotation bracket if your wires are going across the top.

Rich
Logged
Synergy E5: Scorpion HKIII 4025-1100, CC ICE2 120HV, Rail 556/96, V-Bar Silverline

Synergy E7: Quantum 4530-500, CC ICE2 160HV, Rail 716/116, V-Bar Silverline

Offline RyanW

  • Full Member
  • ***
  • Posts: 162
Re: Question to Matt about E5 frames.
« Reply #11 on: December 11, 2012, 04:13:11 PM »
Sand and coat with a Q-Tip or toothpick dipped in CA. That will seal the edge. I also do the to the inside of the anti-rotation bracket. It allows the bearings on the 'anti-rotation pin' to move over the edges smoothly.
Logged
-Ryan

Offline Ktsn

  • Member
  • **
  • Posts: 67
Re: Question to Matt about E5 frames.
« Reply #12 on: December 11, 2012, 04:35:45 PM »
All my wires are inside Nylon wire mesh but I also take my time to sand..  8)
Logged

Offline RichL

  • Synergy Veteran
  • *
  • Posts: 802
Re: Question to Matt about E5 frames.
« Reply #13 on: December 11, 2012, 06:29:15 PM »
Quote from: Ktsn on December 11, 2012, 04:35:45 PM
All my wires are inside Nylon wire mesh but I also take my time to sand..  8)

+1
Logged
Synergy E5: Scorpion HKIII 4025-1100, CC ICE2 120HV, Rail 556/96, V-Bar Silverline

Synergy E7: Quantum 4530-500, CC ICE2 160HV, Rail 716/116, V-Bar Silverline

Offline John

  • Field Representative
  • Full Member
  • ****
  • Posts: 214
Re: Question to Matt about E5 frames.
« Reply #14 on: December 12, 2012, 09:21:45 AM »
Wow nice to see so many people not wrecking the frames, I have seen them up close and they are beefy.  That being said, the guy I fly with has wrecked his frames both times on his e7 but they were some very hard crashes.
Logged
Pages: [1] 2
« previous next »