November 23, 2024, 01:16:31 AM
« previous next »
Pages: [1]

Author Topic: Leaky Fuel Grommet  (Read 3967 times)

Offline Zaneman007

  • Newbie
  • *
  • Posts: 3
Leaky Fuel Grommet
« on: December 15, 2012, 11:54:35 AM »
My fuel tank has sprung a leak. I haven't flown the heli for a couple of months. I went out a couple of weeks ago to fly. While I was filling the tank, I noticed fuel dripping.  It's coming out of the tank around the fuel grommet. Although this just started, the grommet feels loose on the tank. I pulled the grommet and took some measurements. Sure enough the grommet is a bit smaller than the opening, by about .5mm or less?(can't say that I have the best tools)

What gets me is that this just started, two months prior and all was well.

What the heck?

Is anyone else experiencing this?
Logged

Offline Kevin Feil

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2100
Re: Leaky Fuel Grommet
« Reply #1 on: December 15, 2012, 12:15:20 PM »
Haven't ever seen that with a Synergy. Now tell me this, Are you measuring the OD of the Grommet with the Nipple through it? (It will obviously expand when nipple is through it.) Then compare measurement. Keep in mind, I'm not doubting your Skills/intellect , Just have to ask  ;).

Best,

Kevin
Logged
Team Synergy
Team Futaba
Team Scorpion
Team Morgan Fuels

Offline RichL

  • Synergy Veteran
  • *
  • Posts: 802
Re: Leaky Fuel Grommet
« Reply #2 on: December 15, 2012, 03:55:20 PM »
I agree I have with Kevin haven't ever seen that with a Synergy but, even the best grommets will lose their elasticity eventually and appear to shrink.  It was also a little warmer a few months ago which may explain why you are seeing it now.

Rich   
Logged
Synergy E5: Scorpion HKIII 4025-1100, CC ICE2 120HV, Rail 556/96, V-Bar Silverline

Synergy E7: Quantum 4530-500, CC ICE2 160HV, Rail 716/116, V-Bar Silverline

Offline Zaneman007

  • Newbie
  • *
  • Posts: 3
Re: Leaky Fuel Grommet
« Reply #3 on: December 15, 2012, 05:13:48 PM »
I understand that the grommet will expand with the nipple through it.  I measured it without the nipple through it. But even with the nipple in, it is not a tight fit. It's loose? And thats not right.

I used some yellow gas tape (the stuff used for natural gas pipe fittings). I rapped it around the nipple a few or more times, then put the whole thing together. It is now snug. I filled it up and let it pressurize. It held with no leaks.  so we will see what happens when I go to the field.

I have to say, I have never seen this before either, make that ever. 
Logged

Offline Brandon Bartolomucci

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1007
Leaky Fuel Grommet
« Reply #4 on: December 15, 2012, 05:53:05 PM »
I've never had my N5c leak however on my old TRex I did until I dunked it into a fuel jug for a couple of hours. It seemed to put some moisture back into it and worked fine after that.


Regards,
Brandon Bartolomucci
Sent from my iPhone
Logged
Regards,
Brandon Bartolomucci
Team Synergy; Scorpion; & Bavarian Demon

Offline RichL

  • Synergy Veteran
  • *
  • Posts: 802
Re: Leaky Fuel Grommet
« Reply #5 on: December 15, 2012, 06:15:50 PM »
I would have never thought of that but, it makes perfect since.

Rich
Logged
Synergy E5: Scorpion HKIII 4025-1100, CC ICE2 120HV, Rail 556/96, V-Bar Silverline

Synergy E7: Quantum 4530-500, CC ICE2 160HV, Rail 716/116, V-Bar Silverline

Offline Bob Heybrock

  • Field Representative
  • Full Member
  • ****
  • Posts: 108
Re: Leaky Fuel Grommet
« Reply #6 on: December 16, 2012, 08:40:43 AM »
Lest we fail to discover and solve the real problem...Don't let your heli sit for that long! LOL!
Logged
Bob Heybrock, Team Synergy
N5c: OS.55HZ, CGY 750. E7: KDE 700XF, CGY750. E5: KDE 600XF, Spartan Vortex. Radio: Futaba 14SG

Offline James Mineo

  • Factory Specialist
  • Full Member
  • *****
  • Posts: 121
Re: Re: Leaky Fuel Grommet
« Reply #7 on: December 16, 2012, 09:37:53 AM »
Quote from: Bob3506 on December 16, 2012, 08:40:43 AM
Lest we fail to discover and solve the real problem...Don't let your heli sit for that long! LOL!

+1 ^^^ Those Synergy's always need to be flying. I just wish we had better weather here in the Northwest. :D

James

Sent from my EVO using Tapatalk 2

Logged
Team Synergy
Rail Blades

Offline RichL

  • Synergy Veteran
  • *
  • Posts: 802
Re: Leaky Fuel Grommet
« Reply #8 on: December 16, 2012, 03:51:28 PM »
Quote from: Bob3506 on December 16, 2012, 08:40:43 AM
Lest we fail to discover and solve the real problem...Don't let your heli sit for that long! LOL!

I'm going to have to go with Bob and James on this one.   ;D

Rich

Logged
Synergy E5: Scorpion HKIII 4025-1100, CC ICE2 120HV, Rail 556/96, V-Bar Silverline

Synergy E7: Quantum 4530-500, CC ICE2 160HV, Rail 716/116, V-Bar Silverline

Offline Flat Eric

  • Newbie
  • *
  • Posts: 46
  • Wants to be in Team Synergy :)
Re: Leaky Fuel Grommet
« Reply #9 on: December 26, 2012, 11:20:35 AM »
I have been having the same problem, mine was ok when I was running the os 55 hz but when I changed to the hzr my tank grommet started leaking with the pressure. I replaced the grommet as it was over a year old, but still the same  :( I think I now have a solution to it but I am sure to get hate mail over this  ;D I tried the grommet from my trex 700n and it is such a good fit, I have it pressurised just now and will hopefully get it fired up in the next few days, weather dependent. I will update my findings  :)
Logged

Offline Matt Botos

  • Synergy Hero
  • **
  • Posts: 1573
    • Matt Botos
Re: Leaky Fuel Grommet
« Reply #10 on: December 26, 2012, 01:38:46 PM »
Please measure the diameter of the grommet in question. (measure the portion that contacts the hole of the fuel tank) Try not to squash the grommet as you are taking the measurement.

Thanks,

Matt
Logged

Offline Flat Eric

  • Newbie
  • *
  • Posts: 46
  • Wants to be in Team Synergy :)
Re: Leaky Fuel Grommet
« Reply #11 on: December 27, 2012, 12:53:19 PM »
Quote from: Matt Botos on December 26, 2012, 01:38:46 PM
Please measure the diameter of the grommet in question. (measure the portion that contacts the hole of the fuel tank) Try not to squash the grommet as you are taking the measurement.

Thanks,

Matt

Well it works  :)  got three flights on it today with no leaks.

I will try and get a measurement tomorrow, I need to get calipers to measure it.
Logged

Offline Flat Eric

  • Newbie
  • *
  • Posts: 46
  • Wants to be in Team Synergy :)
Re: Leaky Fuel Grommet
« Reply #12 on: December 29, 2012, 12:18:37 PM »
Quote from: Matt Botos on December 26, 2012, 01:38:46 PM
Please measure the diameter of the grommet in question. (measure the portion that contacts the hole of the fuel tank) Try not to squash the grommet as you are taking the measurement.

Thanks,

Matt

Sorry for the delay, here are the measurements for both of the grommets.

Grommet A 13.84mm

Grommet S 12.82mm

Do I get a set of rail blades and limited edition canopy for my r and d?  ;D

Eric

Logged
Pages: [1]
« previous next »