Vibration N5

[AlanzoNembhard]

I have a vibration for hell.I change the main shaft and spindle and I still have the vibration the whole frame on the Heli vibrate do you guy have any suggestion on what to do

[Kevin Feil]

Are your Blades Balanced? Give us a bit more info.
what Head Speed are you able to get to?
Did you have a crash and rebuild it only to find a Vibe issue?

  Give us a bit more information in order to better help you pin point the possible culprit.

Cheers,

Kevin

[AlanzoNembhard]

Yea i had a crash but not a bad one just broke the blade and little bin in the main shaft put all back to together and it flew fine and then made it flybarless im using the cgy 750 and 8fg and my gain are not high at all

[Kevin Feil]

I'm a V-bar Guy, However if You Can List what Happened from Start to Finish. Did it Vibrate after the Rebuild? Was it Fine after the Rebuild and then Start to Vibrate? Did you use a Matched Set of Main Blades? are the Tail Blades Matched in Weight as well? Is the Rear Tail output shaft Bent?  You see, Myself and the Forum need to get More Info in order to better diagnose the issue? I sure don't want to waist your time. But want to accurately pinpoint the problem. Are all Your Main Shaft bearings Good?? LMK.

Kevin

[steffgiguere]

Sometimes even very small crashes bend parts which you think are fine. After changing main shaft and spindle have a look at the tail output shaft, and make sure your new blades are well balanced (I'd say 80% of the time new blades are well balanced but that other 20% of the time is a bitch).

[AlanzoNembhard]

Hey Kevin And Steffgiguere
After i rebuild it was flybar still and it flew fine it when i put the flybarless system on it that when i really notice it The one thing i didn't change is the tail output shaft.But going to change that out today the main and tail blades are not mismatch.I had the CY600sb an flew fine on flybar then i switch it to flybarless still using CY600sb was vibrating bad then i switch to the regularly CY600 blades. Then vibration was not as bad

[Matt Botos]

Blades can make a huge difference! Regular CY blades are fine but you should try a set of dedicated FBL blades. Also, recheck your main shaft on a dial indicator.

[AlanzoNembhard]

I was going to order the railblades but everybody out of stock

[Jerry Kovar]

Greetings... One thing that you did not mention in your main post is if you checked and or changed any of your bearings.   Even if you did not bend your main shaft, you could have easily "notched" a bearing in either your head grips or your main shaft.   Check those bearings to make sure they are smooth and free from ANY grit.  If there is some in any of those bearings and can and will lead to some vibrations which will lead to poor performance in the air, especially on a fly bar-less system.   You could have a bearing that is bad in a traditional set up and not notice it as much, but you will in a FBL set up..


best of luck!

[Matt Botos]

Give Experience RC a call, I sent them 10 sets, maybe they put some aside.

Matt

[Kevin Feil]

Alanzo,

 What's the skinny on your Bird?? Did you narrow down the Vibe issue?

Kevin

[AlanzoNembhard]

Nothing yet kevin im going to change the main shaft and order some rail blade and see what happen ill let you know what the out come is thank for checking up

[Jerry Kovar]

What about the bearings Alanzo?   Are they all ok?...


I ask this again since I helped a guy at SRC this weekend trouble shoot his Heli.   Same type of situation you are in... had a FB set up, a crash, replaced blades, spindle and main shaft.   First flights FBL and had issues.   sure enough, bad main shaft bearings... replaced them and solved the problem...


just curious..

[AlanzoNembhard]

Just order so will see if they get here by the weekend and i will let you guys know the final results

[Kevin Feil]

Alanzo, You best answer Jerry.lol  He brought up a great point What do the Main Shaft Bearings Feel like, none of us want to see you miss any Flight Time, However Jerry's Question holds a lot of water and we need to know what the condition is in order to better Help you. Let us Know..


Kevin