November 22, 2024, 08:09:24 PM
« previous next »
Pages: [1]

Author Topic: My E7 wiring  (Read 2435 times)

flyalan

  • Guest
My E7 wiring
« on: January 13, 2013, 02:53:57 PM »
I decided to post a few pics of my recent E7 rewiring job.  I did like the way I had run the power back to the FBL unit and receiver so I decided to redo the whole thing.

I used 1/8" braided sleeve.  I shorten all of my servo wires as needed and put the braid on just before adding the plastic connector housing.  The 1/8" braid can be slid over the actual connectors but it's much easier this way.

One thing a started doing a couple of months ago was to run a servo extension to the front for the ESC connection.  I use some double sided foam tape to mount the male connector to the frame adjacent to the ESC.  I shorten the ESC wire and plug in the ESC at that point.  This allows easy access to the ESC lead without having to disconnect it from the FBL unit.  I like to check my Castle log files.

Cheers,
Alan





[attachment deleted by admin]

[attachment deleted by admin]

[attachment deleted by admin]
Logged

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: My E7 wiring
« Reply #1 on: January 13, 2013, 03:36:01 PM »
Nice...  :D
Logged
Rodney

Team Synergy

Offline Chris Sexton

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2729
  • Admiral, There be whales here!
My E7 wiring
« Reply #2 on: January 13, 2013, 05:12:13 PM »
Looking good man! I like the visual pop of the orange.


Sent from my iPhone using Tapatalk
Logged
Chris Sexton
Synergy Factory Specialist / Rail Blades / Team Scorpion

Offline Barry Tilson

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 617
  • Perspective Visuals
My E7 wiring
« Reply #3 on: January 13, 2013, 05:42:17 PM »
Very cool. Looks great!


Sent from my iPhone using Tapatalk
Logged
Perspective Visuals

flyalan

  • Guest
My E7 wiring
« Reply #4 on: January 13, 2013, 05:55:32 PM »
I'll have to post pics of the 6S E5 I am working on.  Yellow sleeve to match the yellow in the canopy :-)

Alan

Logged

Offline Barry Tilson

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 617
  • Perspective Visuals
My E7 wiring
« Reply #5 on: January 13, 2013, 05:58:36 PM »
It's nice to see someone as equally compulsive!

Barry

Sent from my iPad using Tapatalk HD
Logged
Perspective Visuals

Offline Bob Heybrock

  • Field Representative
  • Full Member
  • ****
  • Posts: 108
Re: My E7 wiring
« Reply #6 on: January 24, 2013, 08:26:46 PM »
Looks really nice Alan, I'm looking closely at the other parts of the kit too...You know if I just purchased blades, a motor & batteries I could get the rest of the stuff I need off my N5c, that would be difficult (the decision to actually do it) but a thought!
Logged
Bob Heybrock, Team Synergy
N5c: OS.55HZ, CGY 750. E7: KDE 700XF, CGY750. E5: KDE 600XF, Spartan Vortex. Radio: Futaba 14SG

Offline Chris "CSpaced" Mulcahy

  • Member
  • **
  • Posts: 55
  • Lower!
    • AMA
Re: My E7 wiring
« Reply #7 on: January 27, 2013, 09:18:24 AM »
Quote from: Bob3506 on January 24, 2013, 08:26:46 PM
Looks really nice Alan, I'm looking closely at the other parts of the kit too...You know if I just purchased blades, a motor & batteries I could get the rest of the stuff I need off my N5c, that would be difficult (the decision to actually do it) but a thought!

You can't butcher your N5c - that would just be wrong!
Logged
Chris Mulcahy
Team Futaba, Team Castle Creations, Team KDE Direct
Synergy N5c, Synergy E7SE, Synergy E5S

flyalan

  • Guest
My E7 wiring
« Reply #8 on: January 27, 2013, 09:34:54 AM »
Yes. I agree Chris. If Bob tries that we may need to do an  intervention :-). I may be able to help him out at least on servos since he is now the proud owner or an E7.  Well at least by mid week he will be!

Cheers
Alan


Sent from my iPhone using Tapatalk
Logged

Offline Chris "CSpaced" Mulcahy

  • Member
  • **
  • Posts: 55
  • Lower!
    • AMA
Re: My E7 wiring
« Reply #9 on: February 15, 2013, 10:32:53 PM »
I'm just hoping he lets me test fly it!  ;D
Logged
Chris Mulcahy
Team Futaba, Team Castle Creations, Team KDE Direct
Synergy N5c, Synergy E7SE, Synergy E5S
Pages: [1]
« previous next »