November 26, 2024, 03:16:54 AM
« previous next »
Pages: [1] 2

Author Topic: My 12s E5 with Hacker A50  (Read 5840 times)

Offline ChrisRain

  • Newbie
  • *
  • Posts: 18
My 12s E5 with Hacker A50
« on: February 14, 2013, 08:15:25 PM »
Hey guys, thought I would post up some pics of my E5 with the Hacker A50 motor to show that it DOES fit.  :)

My setup is:
E5 non-stretched
Running Rail 556/96
Hacker A50 10L 580kv
Castle 120hv
Gryphon Regulator
MKS 950/980
Pulse 12s 2600mah packs
AR7200bx with a satellite

Enjoy the pics

Both sides of the heli



Gyro tray-



Under the boom block-


ESC/BEC- (BEC is barely visible underneath the wires)



Motor-


As you can see in the following picture the motor DOES rub on the frames. About the bottom 5 cooling fins rub on the frame, I just let the motor wear-in because the rubbing was minor and didn't cause any issues in flight.


As you can see it was a very tight fit



Thanks for looking!
Logged

Offline litespeed

  • Field Representative
  • Full Member
  • ****
  • Posts: 163
Re: My 12s E5 with Hacker A50
« Reply #1 on: February 14, 2013, 08:57:29 PM »
Looks excellent!

Tom
Logged

Offline steffgiguere

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1373
Re: My 12s E5 with Hacker A50
« Reply #2 on: February 14, 2013, 10:19:44 PM »
Would like to see a video of you flying it.
Logged
Team Synergy, Canada

Offline ChrisRain

  • Newbie
  • *
  • Posts: 18
Re: My 12s E5 with Hacker A50
« Reply #3 on: February 14, 2013, 11:15:22 PM »
Quote from: litespeed on February 14, 2013, 08:57:29 PM
Looks excellent!

Tom

Thanks!


Quote from: steffgiguere on February 14, 2013, 10:19:44 PM
Would like to see a video of you flying it.

A friend of mine has a video of me flying it, i'll try to get the video, or get someone to take video of it this weekend. I'll post the video in this thread whenever I get it.  :)
Logged

Offline bleomycin

  • Newbie
  • *
  • Posts: 39
My 12s E5 with Hacker A50
« Reply #4 on: February 14, 2013, 11:59:49 PM »
Fantastic job, the wiring is amazingly clean! I would also love to see a video of it flying, 12s must be nuts!
Logged

Offline Kevin Feil

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2100
Re: My 12s E5 with Hacker A50
« Reply #5 on: February 15, 2013, 12:20:27 AM »
Great Job!! Look forward to a video!

Best,

Kevin
Logged
Team Synergy
Team Futaba
Team Scorpion
Team Morgan Fuels

Offline Magman Mike

  • Newbie
  • *
  • Posts: 19
  • I forgot my sunglasses.
Re: My 12s E5 with Hacker A50
« Reply #6 on: February 15, 2013, 06:41:55 AM »
Looks awesome!  Video or it didn't happen!  :D
Logged
"There was no such thing as a bad day when you have a door knob on the inside of the door." Cmdr. Paul Edward Galanti -retired

Offline ChrisRain

  • Newbie
  • *
  • Posts: 18
Re: My 12s E5 with Hacker A50
« Reply #7 on: February 15, 2013, 07:48:32 AM »
Quote from: bleomycin on February 14, 2013, 11:59:49 PM
Fantastic job, the wiring is amazingly clean! I would also love to see a video of it flying, 12s must be nuts!

Thanks! I won't take credit for the wiring though, it was done by a good friend of mine. I let him wire all of my machines.  ;D  12s is pretty awesome, its completely un-boggable.

Quote from: Kevin Feil on February 15, 2013, 12:20:27 AM
Great Job!! Look forward to a video!

Best,

Kevin
Quote from: Magman Mike on February 15, 2013, 06:41:55 AM
Looks awesome!  Video or it didn't happen!  :D

Thanks guys. Video will be here soon.  :)
Logged

Offline Magman Mike

  • Newbie
  • *
  • Posts: 19
  • I forgot my sunglasses.
Re: My 12s E5 with Hacker A50
« Reply #8 on: February 15, 2013, 10:02:35 PM »
What is the red "Remove Before Flight" attached to?  Tell me that thing has a pitot tube!
Logged
"There was no such thing as a bad day when you have a door knob on the inside of the door." Cmdr. Paul Edward Galanti -retired

Offline ChrisRain

  • Newbie
  • *
  • Posts: 18
Re: My 12s E5 with Hacker A50
« Reply #9 on: February 15, 2013, 10:45:33 PM »
Quote from: Magman Mike on February 15, 2013, 10:02:35 PM
What is the red "Remove Before Flight" attached to?  Tell me that thing has a pitot tube!

That is a gryphon fail safe switch. Something me and my friends all put on our helicopters. I can plug in my batteries in the pits, put the canopy on...walk out to the field. And as soon as I pull that little red "remove before flight" flag, the helicopter initializes.


It is also a low voltage indicator, flashes VERY bright red when I hit low voltage.

Here's a link http://www.gryphon-mall.com/product.php?id_product=50
Logged

Offline Magman Mike

  • Newbie
  • *
  • Posts: 19
  • I forgot my sunglasses.
Re: My 12s E5 with Hacker A50
« Reply #10 on: February 17, 2013, 04:52:41 AM »
Very Cool, thanks for the link!  Only for use with the Gryphon Regulator or can it be incorporated into any flight system?
« Last Edit: February 17, 2013, 04:55:06 AM by Magman Mike »
Logged
"There was no such thing as a bad day when you have a door knob on the inside of the door." Cmdr. Paul Edward Galanti -retired

Offline ChrisRain

  • Newbie
  • *
  • Posts: 18
Re: My 12s E5 with Hacker A50
« Reply #11 on: February 17, 2013, 07:32:51 PM »
Quote from: Magman Mike on February 17, 2013, 04:52:41 AM
Very Cool, thanks for the link!  Only for use with the Gryphon Regulator or can it be incorporated into any flight system?

It only works with the Gryphon hv and lv regulator. The fail-safe plugs directly into the Gryphon regulator.


Well you guys wanted videos, so here's the first of two. Me and a friend were trying to get some aerial footage with his multi-rotor...and another friend of mine was taking video on the ground. If the aerial footage turns out good i'll post that as well.  :)
Synergy E5 & Octacopter @ Chandler Bowl
Logged

Offline Chris Sexton

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2729
  • Admiral, There be whales here!
My 12s E5 with Hacker A50
« Reply #12 on: February 17, 2013, 08:06:04 PM »
Quote from: ChrisRain on February 17, 2013, 07:32:51 PM
Quote from: Magman Mike on February 17, 2013, 04:52:41 AM
Very Cool, thanks for the link!  Only for use with the Gryphon Regulator or can it be incorporated into any flight system?

It only works with the Gryphon hv and lv regulator. The fail-safe plugs directly into the Gryphon regulator.


Well you guys wanted videos, so here's the first of two. Me and a friend were trying to get some aerial footage with his multi-rotor...and another friend of mine was taking video on the ground. If the aerial footage turns out good i'll post that as well.  :)
Synergy E5 & Octacopter @ Chandler Bowl
Needs more pop. It was kinda slow.

Logged
Chris Sexton
Synergy Factory Specialist / Rail Blades / Team Scorpion

Offline Kevin Feil

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2100
Re: My 12s E5 with Hacker A50
« Reply #13 on: February 17, 2013, 09:58:58 PM »
Great Video!!! Thankyou for Posting it!

Kevin
Logged
Team Synergy
Team Futaba
Team Scorpion
Team Morgan Fuels

Offline ChrisRain

  • Newbie
  • *
  • Posts: 18
Re: My 12s E5 with Hacker A50
« Reply #14 on: February 22, 2013, 05:57:43 PM »
Quote from: Chris Sexton on February 17, 2013, 08:06:04 PM
Quote from: ChrisRain on February 17, 2013, 07:32:51 PM
Quote from: Magman Mike on February 17, 2013, 04:52:41 AM
Very Cool, thanks for the link!  Only for use with the Gryphon Regulator or can it be incorporated into any flight system?

It only works with the Gryphon hv and lv regulator. The fail-safe plugs directly into the Gryphon regulator.


Well you guys wanted videos, so here's the first of two. Me and a friend were trying to get some aerial footage with his multi-rotor...and another friend of mine was taking video on the ground. If the aerial footage turns out good i'll post that as well.  :)
Synergy E5 & Octacopter @ Chandler Bowl
Needs more pop. It was kinda slow.

Haha, yeah needs more power too.  ;)

Quote from: Kevin Feil on February 17, 2013, 09:58:58 PM
Great Video!!! Thankyou for Posting it!

Kevin

Thanks!  :D



Got one more video from that day.
Christian Flying the Synergy E5 @ Chandler RC Bowl
Logged
Pages: [1] 2
« previous next »