November 25, 2024, 06:31:34 AM
« previous next »
Pages: [1] 2

Author Topic: What brand hex drivers do you use?  (Read 9661 times)

Offline Greg J

  • Newbie
  • *
  • Posts: 39
  • This hobby in not a race, It's a Journey
What brand hex drivers do you use?
« on: April 10, 2013, 04:22:55 PM »
I've seen everything form $5 bucks to $25 bucks each for hex drivers.  I just want to buy a quality set.  Any suggestions on what's been working for you guys that have been doing this awhile?   Thanks for your input.
Logged

Offline Chris Sexton

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2729
  • Admiral, There be whales here!
What brand hex drivers do you use?
« Reply #1 on: April 10, 2013, 04:49:03 PM »
All MIP here. Never an issue. At 12-18 bucks each depending on where you get them, i hope they hold up.


Sent from my iPhone using Tapatalk 2
Logged
Chris Sexton
Synergy Factory Specialist / Rail Blades / Team Scorpion

Offline Darren Lee

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 620
Re: What brand hex drivers do you use?
« Reply #2 on: April 10, 2013, 05:02:42 PM »
I use Dynamite brand and never had a complaint.  Very nice fit and replaceable tips.

http://www.horizonhobby.com/products/machined-hex-driver-metric-set-red-DYN2904
Logged
Team Synergy / Rail Blades / Morgan Fuel

Offline dpelletier

  • Full Member
  • ***
  • Posts: 198
Re: What brand hex drivers do you use?
« Reply #3 on: April 10, 2013, 05:04:17 PM »
I still use the Align set I bought way back
And also use these Prohold that I got at RTL Fastners, I like these they hold the bolt.
http://rtlfasteners.com/RC/950.html
Logged
Dany -  Not on any Team  :( maybe some day :)
Synergy E5 CGY-750 (my favorite heli)
Furion 6 Flybarless, Skookum 720
Beam E4(v1) FBL, Skookum 540
Futaba 14sg

Inching my way out of being a newbie...

Offline steffgiguere

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1373
Re: What brand hex drivers do you use?
« Reply #4 on: April 10, 2013, 05:37:55 PM »
MIP here.
Logged
Team Synergy, Canada

Offline curmudgeon

  • Synergy Veteran
  • *
  • Posts: 578
Re: What brand hex drivers do you use?
« Reply #5 on: April 10, 2013, 05:49:12 PM »
I use Wiha for ball tips.  Ball tips help when needing to access screws at an angle, but generally strip easier that straight tips due to less surface area contact.

I pretty much use Dynamite for most other metric tools.  The Dynamite straight tip hex drivers have tapered tips, and are thus easy to insert into screw heads.  Dynamite also makes very good quality reamers (for making holes on canopies), and nut drivers.
Logged

Offline Greg J

  • Newbie
  • *
  • Posts: 39
  • This hobby in not a race, It's a Journey
Re: What brand hex drivers do you use?
« Reply #6 on: April 10, 2013, 07:25:48 PM »
Thanks for the input, going to try the MIP's.  Ordered from AMain about $12 ea. free shipping. Glad I asked.
Logged

Offline Brandon Bartolomucci

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1007
What brand hex drivers do you use?
« Reply #7 on: April 10, 2013, 07:47:20 PM »
I've been using the JR Heli Toolkit without issue.


Regards,
Brandon Bartolomucci
Sent from my iPhone
Logged
Regards,
Brandon Bartolomucci
Team Synergy; Scorpion; & Bavarian Demon

Offline scotty82

  • Full Member
  • ***
  • Posts: 102
What brand hex drivers do you use?
« Reply #8 on: April 11, 2013, 01:15:40 AM »
I use Mavrikk hex drivers. They come with straight tip and ball tip. They are hardened and haven't worn out a bit. You can buy replacement tips too.
Logged
Synergy E7, N9 FBL & N9
Hirobo Turbulence D3 EX FBL & Turbulence D3
E-flite Blade 400, mCPX V2 & mSR

Offline Chuck Bole

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 631
Re: What brand hex drivers do you use?
« Reply #9 on: April 11, 2013, 12:24:42 PM »
+1 Darren.. Dynomite drivers. Bought mine back in the 1900's ;D  only time i had  trouble with one was trying to use it for a prybar in a homemade (pre grippy) grippy.

chuck
Logged
Team Synergy Field Representative / Thunder Power

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: What brand hex drivers do you use?
« Reply #10 on: April 11, 2013, 01:09:27 PM »
Quote from: cgbole on April 11, 2013, 12:24:42 PM
+1 Darren.. Dynomite drivers. Bought mine back in the 1900's ;D  only time i had  trouble with one was trying to use it for a prybar in a homemade (pre grippy) grippy.

chuck

Too funny.  I use Dynamite drivers, too, and have been very happy with them.  I just snapped one last week, using it as a pry bar. I was able to file a new flat into the end of it and put it back in the handle.  It works great.
Logged
Rodney

Team Synergy

Offline RyanW

  • Full Member
  • ***
  • Posts: 162
Re: What brand hex drivers do you use?
« Reply #11 on: April 11, 2013, 04:55:54 PM »
I have literally own 90% of the hex drivers made "for the r/c industry" and MIPs are hands down the best. I use the tool bits and have my own ratcheting handle for them. They make straight and ball-end.
Logged
-Ryan

Offline Greg J

  • Newbie
  • *
  • Posts: 39
  • This hobby in not a race, It's a Journey
Re: What brand hex drivers do you use?
« Reply #12 on: April 14, 2013, 01:31:49 PM »
Ok got my new MIP hex drivers in Saturday and started overhauling my HK500 (never again) that the tail bearing failed after 24 minutes of flight. 12 of which were test hovering.  Anyway, I thought I was dealing with cheep screws but it was cheep tools.  Real nice drivers. Thanks to all of you for your great advice..    :)
Logged

Offline Kevin Feil

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2100
Re: What brand hex drivers do you use?
« Reply #13 on: April 16, 2013, 08:52:05 PM »
Greg,
Where did you get yours?

Kevin
Logged
Team Synergy
Team Futaba
Team Scorpion
Team Morgan Fuels

Offline Greg J

  • Newbie
  • *
  • Posts: 39
  • This hobby in not a race, It's a Journey
Re: What brand hex drivers do you use?
« Reply #14 on: April 17, 2013, 02:51:31 PM »
 Kevin, I got my drivers from AMain Hobby $11.93 after discount.
Logged
Pages: [1] 2
« previous next »