November 23, 2024, 01:42:59 PM

Author Topic: FBL Rotors Work Mat  (Read 5582 times)

flyalan

  • Guest
FBL Rotors Work Mat
« on: May 07, 2013, 03:53:32 PM »
Look what just came in via Fedex!
[/size]
This product is well worth the $$. The quality is superb. This is made of a high quality rubber material. It will roll up easily into about a 6" diameter roll. Haven't weighed it but it will definitely not blow away at the field on a windy day
Ralph has done it again!
Cheers
Alan

Offline Kevin Feil

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2100
Re: FBL Rotors Work Mat
« Reply #1 on: May 07, 2013, 04:48:33 PM »
Very Nice Allan!!  Ralph @ FBL Rotors Unlimited really hit a homerun with this one!!!  Way to go Ralph. Well worth the Money, Especially working on the Blade 130x! :D

Kevin
Team Synergy
Team Futaba
Team Scorpion
Team Morgan Fuels

flyalan

  • Guest
Re: FBL Rotors Work Mat
« Reply #2 on: May 07, 2013, 05:04:31 PM »
Maybe Ralph can make a special small heli version with a built in Magnifier ;D   Patent Pending!


Alan

Offline RyanW

  • Full Member
  • ***
  • Posts: 162
Re: FBL Rotors Work Mat
« Reply #3 on: May 07, 2013, 06:45:55 PM »
Quote
Maybe Ralph can make a special small heli version...

We already did that, but ended up using them for drink coasters ;)
-Ryan

Offline Blake

  • Newbie
  • *
  • Posts: 3
Re: FBL Rotors Work Mat
« Reply #4 on: May 08, 2013, 12:40:25 PM »
Here's mine. Looks really nice. Good job Ralph. :) :

flyalan

  • Guest
FBL Rotors Work Mat
« Reply #5 on: May 09, 2013, 06:18:39 AM »
First project with the new mat. Install the Edge HV 160 with some of the new Castle connectors.

Cheers
Alan

Offline Chris Sexton

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2729
  • Admiral, There be whales here!
FBL Rotors Work Mat
« Reply #6 on: May 09, 2013, 06:31:21 AM »

First project with the new mat. Install the Edge HV 160 with some of the new Castle connectors.

Cheers
Alan

Alan, who had the castle connectors for sale? I haven't seen them pop up yet.


Sent from my iPhone using Tapatalk 2
Chris Sexton
Synergy Factory Specialist / Rail Blades / Team Scorpion

flyalan

  • Guest
FBL Rotors Work Mat
« Reply #7 on: May 09, 2013, 07:21:06 AM »
I bought those from Tower Hobbies at the same time as the ESC. Had a 15% off coupon so the connectors were essentially free :-)

Cheers
Alan

Offline Drew Robinson

  • Full Member
  • ***
  • Posts: 183
Re: FBL Rotors Work Mat
« Reply #8 on: June 19, 2013, 08:24:31 PM »
So Sounds like I need that mat?  Everyone seems to say its worth the money...
**Team Synergy**Team Scorpion**

Offline Chris Sexton

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2729
  • Admiral, There be whales here!
FBL Rotors Work Mat
« Reply #9 on: June 19, 2013, 09:17:31 PM »

So Sounds like I need that mat?  Everyone seems to say its worth the money...

Well worth the investment!


Sent from my iPhone using Tapatalk 2
Chris Sexton
Synergy Factory Specialist / Rail Blades / Team Scorpion

Offline Brandon Bartolomucci

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1007
FBL Rotors Work Mat
« Reply #10 on: June 20, 2013, 04:23:48 AM »
I second that. It was way bigger than I expected and thick and durable. Plus as Ralph mentioned to me, since it's made of all solid rubber, you can clean it up with anything that's safe for use on say car tires. Give it that wet tire look if you want!


Regards,
Brandon Bartolomucci
Sent from my iPhone
Regards,
Brandon Bartolomucci
Team Synergy; Scorpion; & Bavarian Demon

Offline dpelletier

  • Full Member
  • ***
  • Posts: 198
Re: FBL Rotors Work Mat
« Reply #11 on: June 20, 2013, 10:36:52 AM »
being put to good use  :)
Dany -  Not on any Team  :( maybe some day :)
Synergy E5 CGY-750 (my favorite heli)
Furion 6 Flybarless, Skookum 720
Beam E4(v1) FBL, Skookum 540
Futaba 14sg

Inching my way out of being a newbie...

Offline Greg Jackson

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1493
    • inner3.com
Re: FBL Rotors Work Mat
« Reply #12 on: June 26, 2013, 04:14:32 PM »
I guess when I buy my next Synergy Heli I will have to get this mat.  For now, i plan on flying this summer. 
Synergy & Rail Field Representative
Team Scorpion||Team BK Servos||Team Pulse|

www.inner3.com

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: FBL Rotors Work Mat
« Reply #13 on: June 26, 2013, 04:34:06 PM »
I guess when I buy my next Synergy Heli I will have to get this mat.  For now, i plan on flying this summer.

I always plan on flying.  It's the crashing and subsequent repairs that I don't plan...   ;D
Rodney

Team Synergy

Offline Greg Jackson

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1493
    • inner3.com
Re: FBL Rotors Work Mat
« Reply #14 on: June 26, 2013, 10:17:34 PM »
Lol, my new mini p was down for almost a week.  It was frustrating to lose so much flight time with it. Hopefully that is it as far as repairs. But when I had the 130x most of my time was spent repairing.
Synergy & Rail Field Representative
Team Scorpion||Team BK Servos||Team Pulse|

www.inner3.com