JR servos and E5 and N7

[Jmiceli11]

Hello,

For those using JR servos which arms did you use. It seems the included arms won't work with the small JR wheels without modification. Pictures would be appreciated.

Thanks,
John

[Mike King]

I think many using the JR servos use Dubro long arms.  Here is a picture of them on Steve Graham's N7. (He posted this in the N7 electronic placement photo thread.)

[Chris Sexton]

My e7se currently has jr8917hvs on it with  DuBro Super Stength standard length arms. Work great. You will have to drill the hole in the horn out a bit to accommodate the servo ball.

sent from my Verizon Samsung Galaxy Note 2

[Mike King]

Thanks for the clarification on that Chris.  I knew they were Dubro arms, but I didn't know they were standard length.

[Chris Sexton]

Thanks for the clarification on that Chris.  I knew they were Dubro arms, but I didn't know they were standard length.

I am sure the Long versions will work too, just don't need the extra length.

[Rodney Kirstine]

I'm using the Dubro arms on my E5.  I have also used the round JR wheels, you just have to enlarge the big center hole on the carbon fiber arm.

[Tommy Wagner]

I'm using the Dubro arms on my E5.  I have also used the round JR wheels, you just have to enlarge the big center hole on the carbon fiber arm.

This is what I use also the small HD JR wheel

[RichH]

I'm using Mikado arms for JR servos. They're stiff, but the spline will trip in a crash and protect the servo.


Rich