November 22, 2024, 08:51:17 PM

Author Topic: Motor/ESC help for a 6s setup  (Read 2866 times)

Offline fran11784

  • Member
  • **
  • Posts: 77
Motor/ESC help for a 6s setup
« on: April 06, 2014, 01:29:48 PM »
I have a E5 kit on the way and really would like to run a 6s setup. Any suggestions on what motor and ESC to go with? I am a novice pilot by today's standards.
Thanks
I hate gravity!

Offline Mark Burberry

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 662
Re: Motor/ESC help for a 6s setup
« Reply #1 on: April 06, 2014, 01:44:29 PM »
Hi, and welcome!

For a 6s setup... A popular motor choice is the Scorpion HKIII-4025-1100KV (6mm shaft) and Castle 120 HV for ESC.

There are a number of different choices though.

Cheers,
Mark

Offline dpelletier

  • Full Member
  • ***
  • Posts: 198
Re: Motor/ESC help for a 6s setup
« Reply #2 on: April 06, 2014, 04:06:16 PM »
What MJB said. It's what I am using. With a castle pro bec.

Sent from my SCH-I605 using Tapatalk

Dany -  Not on any Team  :( maybe some day :)
Synergy E5 CGY-750 (my favorite heli)
Furion 6 Flybarless, Skookum 720
Beam E4(v1) FBL, Skookum 540
Futaba 14sg

Inching my way out of being a newbie...

Offline curmudgeon

  • Synergy Veteran
  • *
  • Posts: 578
Re: Motor/ESC help for a 6s setup
« Reply #3 on: April 06, 2014, 04:39:21 PM »
The Castle 120HV ESC pairs very well with the KDE 600XF-1100 motor.

Offline Ross Lawton

  • Factory Specialist
  • Synergy Veteran
  • *****
  • Posts: 793
Re: Motor/ESC help for a 6s setup
« Reply #4 on: April 07, 2014, 01:05:52 AM »
Hi there Fran11784, and welcome to the Synergy forum.

The great thing with the E5 is its huge flexibility for power plant configurations, but for a 6s setup... A popular motor/ESC combination choice is the Scorpion HKIII-4025-1100KV (6mm shaft) and Castle 120 HV for ESC.

Hope this helps,
Cheers,
Ross
Team Synergy - UK

Offline Greg Jackson

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1493
    • inner3.com
Re: Motor/ESC help for a 6s setup
« Reply #5 on: April 07, 2014, 07:55:55 PM »
I am running the same Scorpion/Castle combo everyone has mentioned and it has been fantastic with over 600 flights so far.   I have flown 4 flights back to back in hot temps and it handles whatever I throw at it.
Synergy & Rail Field Representative
Team Scorpion||Team BK Servos||Team Pulse|

www.inner3.com

Offline fran11784

  • Member
  • **
  • Posts: 77
Re: Motor/ESC help for a 6s setup
« Reply #6 on: April 09, 2014, 05:36:21 AM »
Holy cow, this Scorpion HKIII-4025-1100KV motor is tough to get. Has anyone ever ordered directly for Scorpion?
I hate gravity!

Offline Ross Lawton

  • Factory Specialist
  • Synergy Veteran
  • *****
  • Posts: 793
Re: Motor/ESC help for a 6s setup
« Reply #7 on: April 09, 2014, 07:39:47 AM »
Holy cow, this Scorpion HKIII-4025-1100KV motor is tough to get. Has anyone ever ordered directly for Scorpion?

If you are stuggling find the motor instock with your local stockists then you can order with scorpion directly, they are ultra quick at shipping and orders usually take 3-4 days depending on your location.

Hope this helps,
Cheers,
Ross
Team Synergy - UK

Offline matt_c_25

  • Newbie
  • *
  • Posts: 11
Re: Motor/ESC help for a 6s setup
« Reply #8 on: April 13, 2014, 02:31:50 PM »
eBay?


Sent from my iPhone using Tapatalk

Offline Chris Wall

  • Field Representative
  • Full Member
  • ****
  • Posts: 221
    • WallsWorld
Re: Motor/ESC help for a 6s setup
« Reply #9 on: April 13, 2014, 11:02:01 PM »
Holy cow, this Scorpion HKIII-4025-1100KV motor is tough to get. Has anyone ever ordered directly for Scorpion?

I have ordered my last 3 Scorpion motors directly from Scorpion and they come 2 day FedEx for free (that was on a 4525-520 Ultimate and 2 4530-500 LEs).  And I did order them one at a time, not all in one order...
Synergy Field Representative / Team Scorpion / Team FBL Rotors
www.fortbendhelis.com

Offline fran11784

  • Member
  • **
  • Posts: 77
Re: Motor/ESC help for a 6s setup
« Reply #10 on: April 14, 2014, 07:31:48 AM »
Since I have plenty of battery's, I decided to run 12s. The manual says 630kv. I see a 650 and a 550kv. 550 be good?
I hate gravity!

Offline okanor

  • Full Member
  • ***
  • Posts: 156
Re: Motor/ESC help for a 6s setup
« Reply #11 on: April 14, 2014, 08:26:59 AM »
The 550 kV is a solid choice. If you haven't already checked put MrMels head speed calculator I would run both through it and see what works best for you. I have ordered directly from Scorpion several times and they ship very quickly.
http://heli.dacsa.net/calcv3/Default.aspx
Sent from my Nexus 7 using Tapatalk
Low and Slow

Offline Chris Wall

  • Field Representative
  • Full Member
  • ****
  • Posts: 221
    • WallsWorld
Re: Motor/ESC help for a 6s setup
« Reply #12 on: April 14, 2014, 08:44:24 AM »
I have the Savox 5055 550Kv in my E5, running 2550 for IU2, with two Pulse Ultra 2600 45C batteries - love it!
Synergy Field Representative / Team Scorpion / Team FBL Rotors
www.fortbendhelis.com

Offline fran11784

  • Member
  • **
  • Posts: 77
Re: Motor/ESC help for a 6s setup
« Reply #13 on: April 14, 2014, 08:59:30 AM »
The batts I have are 5200's. a bit overkill for a 550 I guess but it's what I have. I'll check the calculator too..
I hate gravity!