November 24, 2024, 10:19:53 PM
« previous next »
Pages: [1] 2

Author Topic: Required Tightness - Jesus Bolt  (Read 3313 times)

Offline Aterren

  • Newbie
  • *
  • Posts: 31
Required Tightness - Jesus Bolt
« on: August 10, 2014, 09:58:21 PM »
How tight should it be?  We have read 'not tight' so I tested the extreme case and I flew 3 flights last weekend with no nuts on the main gear cross bolt or the collar above the gear.

They didn't move a bit. :)
–-----
Edit to correct horrific sentence structure and grammar.
« Last Edit: August 13, 2014, 06:14:17 PM by Aterren »
Logged

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: Required Tightness - Jesus Bolt
« Reply #1 on: August 10, 2014, 10:49:54 PM »
You want to tighten it just enough to take up the slack between the nut and the collar.  The plastic lock nut shouldn't back out unless it's worn out.
Logged
Rodney

Team Synergy

Offline jluthe1

  • Member
  • **
  • Posts: 62
  • Addicted to heli's ....25 and counting ❗️
Re: Required Tightness - Jesus Bolt
« Reply #2 on: August 10, 2014, 10:58:40 PM »
Quote from: RodneyK on August 10, 2014, 10:49:54 PM
You want to tighten it just enough to take up the slack between the nut and the collar.  The plastic lock nut shouldn't back out unless it's worn out.
Agreed
Logged
Synergy E5 stretch
Fusion 50
Mini Titan
Trex 450 x 4⃣
Trex 150
Goblin 380 (on order 😃)
Too many micros to list 😝

Offline Aterren

  • Newbie
  • *
  • Posts: 31
Re: Required Tightness - Jesus Bolt
« Reply #3 on: August 11, 2014, 12:35:24 PM »
Did you catch that this nut  flew without ANY nut and it did not move.   People should have 100% confidence in the directions to barely tighten.   

Feel free to make fun of my poor pre-flight!


Sent from my iPad using Tapatalk
« Last Edit: August 11, 2014, 07:24:20 PM by Aterren »
Logged

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: Required Tightness - Jesus Bolt
« Reply #4 on: August 11, 2014, 12:49:31 PM »
That is pretty amazing and you have way better luck than I do! 
Logged
Rodney

Team Synergy

Offline Mike Spano

  • Synergy Hero
  • **
  • Posts: 1038
Re: Required Tightness - Jesus Bolt
« Reply #5 on: August 11, 2014, 02:42:58 PM »
Quote from: RodneyK on August 11, 2014, 12:49:31 PM
That is pretty amazing and you have way better luck than I do!

I was thinking the same thing....lol...if that was mine it would be a ball on the ground....
Logged
Team Synergy
Rail Blades
TRM Power
Team Byron Fuels
MKS Servos

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: Required Tightness - Jesus Bolt
« Reply #6 on: August 11, 2014, 03:33:21 PM »
Quote from: Gasser Mike on August 11, 2014, 02:42:58 PM
I was thinking the same thing....lol...if that was mine it would be a ball on the ground....

My N7 ended up in a tree at a fun fly earlier this year after I lost the Jesus bolt.  I guess I can't really say that it was bad luck in that case, though, because there was zero damage.  Probably the weirdest crash I've ever had.
Logged
Rodney

Team Synergy

Offline Aterren

  • Newbie
  • *
  • Posts: 31
Re: Required Tightness - Jesus Bolt
« Reply #7 on: August 11, 2014, 07:23:20 PM »
Quote from: RodneyK on August 11, 2014, 12:49:31 PM
That is pretty amazing and you have way better luck than I do!

That is better luck that I have too. :)
Logged

Offline Mike Spano

  • Synergy Hero
  • **
  • Posts: 1038
Re: Required Tightness - Jesus Bolt
« Reply #8 on: August 12, 2014, 09:58:29 AM »
Quote from: RodneyK on August 11, 2014, 03:33:21 PM
Quote from: Gasser Mike on August 11, 2014, 02:42:58 PM
I was thinking the same thing....lol...if that was mine it would be a ball on the ground....

My N7 ended up in a tree at a fun fly earlier this year after I lost the Jesus bolt.  I guess I can't really say that it was bad luck in that case, though, because there was zero damage.  Probably the weirdest crash I've ever had.

that is truly amazing....you get any pics? that is wild!
Logged
Team Synergy
Rail Blades
TRM Power
Team Byron Fuels
MKS Servos

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: Required Tightness - Jesus Bolt
« Reply #9 on: August 12, 2014, 02:00:15 PM »
You'd think that with the crowd we had gathered around while someone climbed up and got it, someone would have taken some pictures but, no. :(  I think everyone was so shocked that it was just sitting there with no damage, nobody thought to snap any pictures.
Logged
Rodney

Team Synergy

Offline Mike Spano

  • Synergy Hero
  • **
  • Posts: 1038
Re: Required Tightness - Jesus Bolt
« Reply #10 on: August 12, 2014, 03:12:43 PM »
that's freaking awesome  man! lol
Logged
Team Synergy
Rail Blades
TRM Power
Team Byron Fuels
MKS Servos

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: Required Tightness - Jesus Bolt
« Reply #11 on: August 12, 2014, 03:41:17 PM »
« Last Edit: August 12, 2014, 03:44:21 PM by RodneyK »
Logged
Rodney

Team Synergy

Offline Mike Spano

  • Synergy Hero
  • **
  • Posts: 1038
Re: Required Tightness - Jesus Bolt
« Reply #12 on: August 13, 2014, 11:39:10 AM »
Quote from: RodneyK on August 12, 2014, 03:41:17 PM
I made up for it the next day...   :o

http://synergyrchelicopters.com/forum/index.php?topic=2689.0

ahhhh crap! I didn't put two and two together and realize that was you...that really sucks.
Logged
Team Synergy
Rail Blades
TRM Power
Team Byron Fuels
MKS Servos

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: Required Tightness - Jesus Bolt
« Reply #13 on: August 13, 2014, 12:12:20 PM »
I used it as an excuse to upgrade from the YS 91SRX to the YS 120SRX, LOL.
Logged
Rodney

Team Synergy

Offline Mike Spano

  • Synergy Hero
  • **
  • Posts: 1038
Re: Required Tightness - Jesus Bolt
« Reply #14 on: August 13, 2014, 02:19:26 PM »
hahaha. how is the mid tuning on that 120? the guys at my field caught absolute hell trying to tune out the "four stroking" as I call it in a hover. but had tons of power on the top......

I am loving my new N7 with a 105 in it. I am actually looking for another one now! lol
Logged
Team Synergy
Rail Blades
TRM Power
Team Byron Fuels
MKS Servos
Pages: [1] 2
« previous next »