October 31, 2024, 08:05:32 PM

Author Topic: BotoSizer  (Read 1048 times)

Offline RandyK

  • Newbie
  • *
  • Posts: 7
BotoSizer
« on: November 24, 2014, 08:55:18 PM »
Well I got this cool tool but it has these spare parts and I didn't want to loose them. So  I thought I would pass along this tip.

Here is what you do with the spare parts: pic 1

Well using a 7/16” drill bit, enlarge the existing hole, in the handle, drilling to the depth of 1 7/8”. Purchase a 7/16” vacuum cap/ wire end cap from Lowes or Home Depot and a 1.5 mm allen wrench. Cut the wrench to desired size. See pic 2

Now you have a storage place for all those loose parts; See pic 3


 


Offline dpelletier

  • Full Member
  • ***
  • Posts: 198
Re: BotoSizer
« Reply #1 on: November 24, 2014, 08:58:16 PM »
very clever.
Dany -  Not on any Team  :( maybe some day :)
Synergy E5 CGY-750 (my favorite heli)
Furion 6 Flybarless, Skookum 720
Beam E4(v1) FBL, Skookum 540
Futaba 14sg

Inching my way out of being a newbie...