November 21, 2024, 06:59:13 AM
« previous next »
Pages: [1] 2

Author Topic: CGY750 Config Files  (Read 13618 times)

Offline Matt Botos

  • Synergy Hero
  • **
  • Posts: 1573
    • Matt Botos
CGY750 Config Files
« on: November 17, 2011, 08:18:02 PM »
Here is my most recent setup file from the CGY750. Enjoy!

Matt

[attachment deleted by admin]
« Last Edit: January 18, 2012, 10:31:36 PM by Matt Botos »
Logged

Offline Tommy Wagner

  • Field Representative
  • Sr. Member
  • ****
  • Posts: 418
N5c CGY750 Setup File
« Reply #1 on: November 17, 2011, 08:56:55 PM »
Was there much of a change in the setup between the N5 and N5c?

I just put a few more flights on my N5c with the total g and there are just a few changes in the response match. From the N5 to the N5c there is a little. Bounce in it I forgot my laptop so I could not adjust it. I'm thinking it is from the C being lighter.


Tommy

Sent from my iPhone using Tapatalk
Logged

Offline AlanzoNembhard

  • Member
  • **
  • Posts: 50
Re: N5c CGY750 Setup File
« Reply #2 on: November 17, 2011, 10:02:59 PM »
Thanks Matt for the File will try it out this weekend . Do you have any other tip on CGY750 Matt Rock
Logged

Offline flyboynellor

  • Newbie
  • *
  • Posts: 26
Re: N5c CGY750 Setup File
« Reply #3 on: November 18, 2011, 11:37:45 AM »
Can't open the (N5C.gyr) file. What program opens this file?
Logged
Synergy N5C
Synergy N9

Offline AlanzoNembhard

  • Member
  • **
  • Posts: 50
Re: N5c CGY750 Setup File
« Reply #4 on: November 18, 2011, 05:03:57 PM »
I don't think you can open it
Logged

Offline scotty82

  • Full Member
  • ***
  • Posts: 102
Re: N5c CGY750 Setup File
« Reply #5 on: November 19, 2011, 03:08:56 PM »
Guys you need the Futaba CIU-2 interface to do the update. All the files are on the Futaba site. Go to this link http://www.futaba-rc.com/software-updates.html and get the CGY750 Link Data tool and CIU-2 interface software.

Cheers
Logged
Synergy E7, N9 FBL & N9
Hirobo Turbulence D3 EX FBL & Turbulence D3
E-flite Blade 400, mCPX V2 & mSR

Offline Tommy Wagner

  • Field Representative
  • Sr. Member
  • ****
  • Posts: 418
N5c CGY750 Setup File
« Reply #6 on: November 19, 2011, 04:51:41 PM »
Quote from: scotty82 on November 19, 2011, 03:08:56 PM
Guys you need the Futaba CIU-2 interface to do the update. All the files are on the Futaba site. Go to this link http://www.futaba-rc.com/software-updates.html and get the CGY750 Link Data tool and CIU-2 interface software.

Cheers
I think that they are looking for a program to look at the file to compare the settings


Tommy

Sent from my iPhone using Tapatalk
Logged

Offline AlanzoNembhard

  • Member
  • **
  • Posts: 50
Re: N5c CGY750 Setup File
« Reply #7 on: November 19, 2011, 06:05:10 PM »
You got it Tommy
Logged

Offline scotty82

  • Full Member
  • ***
  • Posts: 102
Re: N5c CGY750 Setup File
« Reply #8 on: November 20, 2011, 07:31:52 PM »
Sorry guys I misunderstood :-[. I manually went through all my GY701 settings and made a table in MS Excel for the various menus. I am not sure what program can open it. Maybe it can be saved as a .dat or .bat or .txt file and it can be opened somehow?
Logged
Synergy E7, N9 FBL & N9
Hirobo Turbulence D3 EX FBL & Turbulence D3
E-flite Blade 400, mCPX V2 & mSR

Offline AlanzoNembhard

  • Member
  • **
  • Posts: 50
Re: N5c CGY750 Setup File
« Reply #9 on: November 20, 2011, 11:09:51 PM »
Its ok scotty i try his setting today and it fly really good just had to change a couple of thing but it would be nice to have a software that you can compare your setting versus some else on your computer when your at home 
Logged

Offline Matt Botos

  • Synergy Hero
  • **
  • Posts: 1573
    • Matt Botos
Re: CGY750 Config Files
« Reply #10 on: January 18, 2012, 10:33:03 PM »
New files uploaded working from CGY750 version 1.20

Thanks,

Matt
Logged

Offline GScott

  • Newbie
  • *
  • Posts: 13
Re: CGY750 Config Files
« Reply #11 on: February 07, 2012, 08:33:32 AM »
Has anyone found a program that lets you view the settings in Matt's config files?  I would like to review the settings before uploading them.
Logged

Offline scotty82

  • Full Member
  • ***
  • Posts: 102
CGY750 Config Files
« Reply #12 on: February 07, 2012, 02:07:16 PM »
I was going to load it in the CGY750 and manually pull all the numbers and settings out from each menu. It appears there is no other way at the moment.


Sent from my iPhone using Tapatalk
Logged
Synergy E7, N9 FBL & N9
Hirobo Turbulence D3 EX FBL & Turbulence D3
E-flite Blade 400, mCPX V2 & mSR

Offline Matt Botos

  • Synergy Hero
  • **
  • Posts: 1573
    • Matt Botos
Re: CGY750 Config Files
« Reply #13 on: February 10, 2012, 08:14:37 PM »
Sorry guys I don't think there is a way to view the data.
Also, if you use these files, make sure you clear all of the neutral settings as well as the pitch-aileron and pitch-elevator mixing. You will need to re level your swash as the neutral settings are specific to each helicopter.

Thanks,

Matt
Logged

Offline Kevin Dalrymple

  • Field Representative
  • Sr. Member
  • ****
  • Posts: 397
Re: CGY750 Config Files
« Reply #14 on: April 21, 2012, 06:41:29 PM »
Matt

I down loaded you N5C file and here is what you have. If thfuntion is not listed it is set to the defalt that is listed in the manual. Matts N5C file has expo in the 750 (Stock percentage). Some people like me set the EXPO to 0% and add expo in on the radio.

Rudder
Basic:
Servo DG:750
SV Limit A 135%  B 115%
Ft Mode 3D

EXPERT

Dly Mode = Constant

ALE
Basic Menu = No Changes

Expert
Dly Mode = Constant

ELE

Basic = No changes

Expert
Dly mode = Constant

Swash

Basic
ServoTyp = DG:285Hz

Servo Dir = Combo#7
(you will need to find the right one for you)
Logged
Synergy Field Rep
Rail Blades Field Rep
Pages: [1] 2
« previous next »