Author Topic: Pieces that go into main grip (Read 1016 times)

bgymr · « **on:** October 22, 2015, 08:25:35 AM »

So my N5c is teh old belt tail drive. It has a funky head on it. There are spacers that go into the main grip where the screws for the main blades are. Anyone have an idea what part number they are and where to buy them? They don't appear in the manual.

Tommy Wagner · « **Reply #1 on:** October 22, 2015, 08:28:07 AM »

On the old style head there were no washers for the bolts but you will still need the blade washers

Sent from my iPad using Tapatalk

Tommy Wagner · « **Reply #2 on:** October 22, 2015, 08:34:15 AM »

Here's the link to them if someone changed the grips
http://mattbotos.com/store/index.php?main_page=product_info&cPath=0&products_id=1732

Sent from my iPad using Tapatalk

Rodney Kirstine · « **Reply #3 on:** October 22, 2015, 09:48:23 AM »

Also, the original N5C manual can be found here:

https://dl.dropboxusercontent.com/u/12820571/N5c_Manual_v3.2.pdf

Maybe you could post a picture of the head/blade grips, too, so we know for sure which blade grips are on it.

bgymr · « **Reply #4 on:** October 22, 2015, 01:20:53 PM »

tommy that is them. I will order them now. But dang 9 dollars for some washers!

Mike Spano · « **Reply #5 on:** October 22, 2015, 03:14:12 PM »

well, they are not exactly "washers". they are blade bolt adapters, they are a machined part. not a cheap as a simple washer.

Author Topic: Pieces that go into main grip (Read 1016 times)

bgymr

Pieces that go into main grip

Tommy Wagner

Re: Pieces that go into main grip

Tommy Wagner

Re: Pieces that go into main grip

Rodney Kirstine

Re: Pieces that go into main grip

bgymr

Re: Pieces that go into main grip

Mike Spano

Re: Pieces that go into main grip