November 23, 2024, 03:23:25 AM

Author Topic: New heavy duty clutch  (Read 5918 times)

Offline richardmid1

  • Newbie
  • *
  • Posts: 9
New heavy duty clutch
« on: April 20, 2016, 08:05:13 AM »
Did I see something about a new heavy duty clutch for the N7 or did I imagine it?  :-\

Offline Mike Spano

  • Synergy Hero
  • **
  • Posts: 1038
Re: New heavy duty clutch
« Reply #1 on: April 20, 2016, 08:08:10 AM »
its coming. its in production right now. you will love it!  :D
Team Synergy
Rail Blades
TRM Power
Team Byron Fuels
MKS Servos

Offline G.ford

  • Newbie
  • *
  • Posts: 29
Re: New heavy duty clutch
« Reply #2 on: April 20, 2016, 08:35:43 AM »
What makes it better than the stock clutch?


Sent from my iPhone using Tapatalk

Offline Chris Sexton

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2729
  • Admiral, There be whales here!
Re: New heavy duty clutch
« Reply #3 on: April 20, 2016, 09:24:19 AM »
What makes it better than the stock clutch?


Sent from my iPhone using Tapatalk

Everything is bigger :)

25% increase in bell size, clutch shoe contact area, weight of the shoes, etc. it will engage and hold the torque of modern 700 class nitro motors and offer increases life of the lining.
« Last Edit: April 28, 2016, 05:00:35 PM by Matt Botos »
Chris Sexton
Synergy Factory Specialist / Rail Blades / Team Scorpion

Offline Mike Spano

  • Synergy Hero
  • **
  • Posts: 1038
Re: New heavy duty clutch
« Reply #4 on: April 20, 2016, 11:06:05 AM »
the first immediate thing you will notice is a smoother idle, and also a smoother engagement as you spool up. I was extremely impressed with the engagement at first, then I started flying the absolute crap out of it, and I cant seem to make it slip at all, period, none.....(not that I had a problem with the original one, bc I didn't, but this one is beefy!)

its great. IMO the liners are easier to install also. I have to look back at my notes, I think the gap is a tiny bit bigger due to the larger clutch. maybe 15 thou. total gap. what I am getting at is I did not have to break in the new liner, it idled perfectly without any areas needing to be sanded down or the head held and broken in. very nice.

« Last Edit: April 28, 2016, 05:00:57 PM by Matt Botos »
Team Synergy
Rail Blades
TRM Power
Team Byron Fuels
MKS Servos

Offline Charles Carrington

  • Field Representative
  • Member
  • ****
  • Posts: 64
Re: New heavy duty clutch
« Reply #5 on: April 20, 2016, 09:32:57 PM »
Just wondering. Would that clutch+bell  be overkill for the N5c
Synergy E5s - E7

Synergy N5c - N7

Team Synergy - Rail Blades

Offline cml001

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 684
Re: New heavy duty clutch
« Reply #6 on: April 20, 2016, 10:20:24 PM »
Charles.. I was thinking the same thing!
Clay
I can fly helicopters... Upside down!

Offline Mike Spano

  • Synergy Hero
  • **
  • Posts: 1038
Re: New heavy duty clutch
« Reply #7 on: April 21, 2016, 07:39:06 AM »
it wont fit the n5c IIRC. the bell is too large, it would hit the frames on the front.

the bell is so large, when you slide it through the frames of the N7, you only have .5-1mm of clearance on either side (when installing). after its installed though its not between the frames.

also, the extra weight of the clutch assembly would probably be too much for the .55 to handle properly. that is why the n5c clutch is milled out, and not a solid chunk like the n7 clutch, to remove weight to help the motor recover quicker.
Team Synergy
Rail Blades
TRM Power
Team Byron Fuels
MKS Servos

Offline Gabriel Sandoval

  • Field Representative
  • Sr. Member
  • ****
  • Posts: 322
  • If your not crashin' your not trying hard enough..
    • Midwest Heli Boyz
Re: New heavy duty clutch
« Reply #8 on: May 03, 2016, 08:43:29 AM »
I will have to get this clutch for the N7 I just picked up.  ;)
Team Synergy
Team Scorpion
Team Dee Force Aviation
Team YS Performance USA
Looking for a fuel Sponsor

Offline Richard Rollins

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 553
Re: New heavy duty clutch
« Reply #9 on: May 03, 2016, 06:06:59 PM »
Any idea on the availability date?
Rick
Team Synergy Team Rails, Team Scorpion

Offline Kevin Feil

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2100
Re: New heavy duty clutch
« Reply #10 on: May 03, 2016, 09:52:48 PM »
Damn Richard, you missed the Pre-Order on these also. Next time I will get one for you. 😜

K
Team Synergy
Team Futaba
Team Scorpion
Team Morgan Fuels

Offline Richard Rollins

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 553
Re: New heavy duty clutch
« Reply #11 on: May 03, 2016, 10:07:01 PM »
Lol I appreciate it Kevin. I got to get that wifi hooked up on the plane...
Rick
Team Synergy Team Rails, Team Scorpion

Offline Kevin Feil

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2100
Re: New heavy duty clutch
« Reply #12 on: May 03, 2016, 10:26:44 PM »
You know I'm just kidding, No Pre-Orders 😬 Go go?
Team Synergy
Team Futaba
Team Scorpion
Team Morgan Fuels

Offline Richard Rollins

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 553
Re: New heavy duty clutch
« Reply #13 on: May 04, 2016, 10:04:08 AM »
Yea , go go is on the menu but not on the plate yet. Oil prices keeping our budget in check.. I knew you were kidding .
Rick
Team Synergy Team Rails, Team Scorpion

Offline Kevin Feil

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2100
Re: New heavy duty clutch
« Reply #14 on: May 04, 2016, 11:04:00 PM »
Give me a call when you need your ADSB solution for that bad boy 😎. Also when you are ready for GO GO, I bet I can beat anyone's prices. Plan on training Eldred on avionics next, let him take the helm and I retire. 😬

K
Team Synergy
Team Futaba
Team Scorpion
Team Morgan Fuels