November 24, 2024, 07:12:58 PM

Author Topic: How to remove clutch one way  (Read 1817 times)

Offline Antonio

  • Newbie
  • *
  • Posts: 9
How to remove clutch one way
« on: June 13, 2016, 02:03:08 PM »
Hi guys.
My N7 clutch one way bearing is broken. I can't get out the one way from the clutch. Any tip there?
Antonio

Offline Chris Sexton

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2729
  • Admiral, There be whales here!
Re: How to remove clutch one way
« Reply #1 on: June 13, 2016, 03:41:29 PM »
Hi guys.
My N7 clutch one way bearing is broken. I can't get out the one way from the clutch. Any tip there?
Antonio

It takes a press to do it right, and make sure you check the engaged rotation of the new bearing before you press it in.
Chris Sexton
Synergy Factory Specialist / Rail Blades / Team Scorpion

Offline Gabriel Sandoval

  • Field Representative
  • Sr. Member
  • ****
  • Posts: 322
  • If your not crashin' your not trying hard enough..
    • Midwest Heli Boyz
Re: How to remove clutch one way
« Reply #2 on: June 14, 2016, 02:32:41 PM »
If you don't have access to a press you can also use a couple sockets and a vice to press the bearing out.

Gabe
Team Synergy
Team Scorpion
Team Dee Force Aviation
Team YS Performance USA
Looking for a fuel Sponsor

Offline cml001

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 684
Re: How to remove clutch one way
« Reply #3 on: June 14, 2016, 06:36:22 PM »
Yep! Match the up close tho... It's possible to damage the bearing.
Clay
I can fly helicopters... Upside down!

Offline Antonio

  • Newbie
  • *
  • Posts: 9
Re: How to remove clutch one way
« Reply #4 on: June 20, 2016, 09:56:54 AM »
Clutch fixed. Vice and sockets.
Thanks!

Offline Mike Spano

  • Synergy Hero
  • **
  • Posts: 1038
Re: How to remove clutch one way
« Reply #5 on: June 20, 2016, 11:12:49 AM »
good job man. I have never been successful removing one from a clutch before. I can get them out, its getting the new one back in that I have never been able to correctly.
Team Synergy
Rail Blades
TRM Power
Team Byron Fuels
MKS Servos

Offline cml001

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 684
Re: How to remove clutch one way
« Reply #6 on: June 20, 2016, 05:38:14 PM »
Lol.. When I need to replace the clutch or the one way.. I usually just replace them both... Lol
Clay
I can fly helicopters... Upside down!

Offline Mike Spano

  • Synergy Hero
  • **
  • Posts: 1038
Re: How to remove clutch one way
« Reply #7 on: June 21, 2016, 07:51:35 AM »
Lol.. When I need to replace the clutch or the one way.. I usually just replace them both... Lol

me too....too much work to replace the owb, especially for a lazy person like myself!
Team Synergy
Rail Blades
TRM Power
Team Byron Fuels
MKS Servos