November 25, 2024, 09:06:46 AM
« previous next »
Pages: [1] 2

Author Topic: Just preordered mine....which tail servo?  (Read 3179 times)

Offline mivaldes

  • Newbie
  • *
  • Posts: 11
Just preordered mine....which tail servo?
« on: October 11, 2017, 04:08:30 PM »
Hello all!

Just preordered my 516 from Amain....

I know many are using the MKS9767 for cyclic. What should I use for the tail servo?  Also having trouble finding a CGY750 in stock anywhere.....

Marcus
Fayetteville, GA
Logged

Offline Josh Easter

  • Field Representative
  • Member
  • ****
  • Posts: 87
  • 812-278-1997
Re: Just preordered mine....which tail servo?
« Reply #1 on: October 11, 2017, 04:15:27 PM »
Marcus,

I am using the MKS HBL980. Working great!!
Logged
Team Synergy

Offline mivaldes

  • Newbie
  • *
  • Posts: 11
Re: Just preordered mine....which tail servo?
« Reply #2 on: October 11, 2017, 04:21:02 PM »
I just realized I've got a Futaba BLS251 laying around from a TREX 600.  Might use that, but may go all new on this heli!

Thanks for the recommendation Josh....(Is this the Josh from Denver I met this past weekend)?

Marcus
Logged

Offline Rob Cherry

  • Factory Pilot
  • Sr. Member
  • *****
  • Posts: 341
Re: Just preordered mine....which tail servo?
« Reply #3 on: October 11, 2017, 05:48:48 PM »
That may have been Josh Moen, at Matt's? I have the hbl980 in one of my 516s and a bls256 in the other. Both are fantasy.

Sent from my XT1254 using Tapatalk

Logged
Synergy Factory Pilot

Offline Chris Sexton

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2729
  • Admiral, There be whales here!
Re: Just preordered mine....which tail servo?
« Reply #4 on: October 11, 2017, 07:11:30 PM »
Quote from: Rob Cherry on October 11, 2017, 05:48:48 PM
Both are fantasy.



Fantasy huh?


Sent from my iPhone using Tapatalk
Logged
Chris Sexton
Synergy Factory Specialist / Rail Blades / Team Scorpion

Offline Rob Cherry

  • Factory Pilot
  • Sr. Member
  • *****
  • Posts: 341
Re: Just preordered mine....which tail servo?
« Reply #5 on: October 11, 2017, 08:49:55 PM »
Yep. I have a servo fetish.

Sent from my XT1254 using Tapatalk

Logged
Synergy Factory Pilot

Offline cml001

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 684
Re: Just preordered mine....which tail servo?
« Reply #6 on: October 11, 2017, 09:27:49 PM »
Lol
Logged
Clay
I can fly helicopters... Upside down!

Offline Mike King

  • Field Representative
  • Sr. Member
  • ****
  • Posts: 256
  • Viva la nitro!
Re: Just preordered mine....which tail servo?
« Reply #7 on: October 12, 2017, 06:56:02 AM »
I too am using the HBL980 and it works like an absolute champ in the model.  Tail holds like a vice even in strong winds..........  I agree with Mr. Cherry, it's fantasy :)
Logged
Mike King
Field Representative

Offline Richard Rollins

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 553
Re: Just preordered mine....which tail servo?
« Reply #8 on: October 12, 2017, 06:58:22 AM »
Marcus,
You use a Regulator for  the BLS251? IT is limited to 6v. I am using a bls256hv I had sitting around, but those are hard to find .
Logged
Rick
Team Synergy Team Rails, Team Scorpion

Offline mivaldes

  • Newbie
  • *
  • Posts: 11
Re: Just preordered mine....which tail servo?
« Reply #9 on: October 12, 2017, 07:02:39 AM »
The BLS251 was pulled from a helicopter I bought off of Craigslist, never flew, and just harvested parts and electronics.  I'm going to go with one of the other recommendations here!

Thanks guys,
Marcus

P.S. Is there a way around the "verification" at the bottom of these posts?  Most annoying ones I've ever seen....
Logged

Offline Richard Rollins

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 553
Re: Just preordered mine....which tail servo?
« Reply #10 on: October 12, 2017, 08:32:29 AM »
Just make sure you pay attention to the voltage on your choice. What ESC are you running?
Logged
Rick
Team Synergy Team Rails, Team Scorpion

Offline Chris Sexton

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2729
  • Admiral, There be whales here!
Re: Just preordered mine....which tail servo?
« Reply #11 on: October 12, 2017, 08:33:52 AM »
Quote from: mivaldes on October 12, 2017, 07:02:39 AM


P.S. Is there a way around the "verification" at the bottom of these posts?  Most annoying ones I've ever seen....

Goes away after you post more. Keeps the troll bots off the site.
Logged
Chris Sexton
Synergy Factory Specialist / Rail Blades / Team Scorpion

Offline fran11784

  • Member
  • **
  • Posts: 77
Re: Just preordered mine....which tail servo?
« Reply #12 on: October 12, 2017, 11:15:11 AM »
Quote from: mivaldes on October 11, 2017, 04:08:30 PM
Hello all!

Just preordered my 516 from Amain....
« Last Edit: October 12, 2017, 12:10:44 PM by fran11784 »
Logged
I hate gravity!

Offline fran11784

  • Member
  • **
  • Posts: 77
Re: Just preordered mine....which tail servo?
« Reply #13 on: October 12, 2017, 11:20:48 AM »
Quote
Just preordered my 516 from Amain....



lol me to like 65 days ago.... I could have pre-ordered a full scale Bell 429 and had it sooner.

Logged
I hate gravity!

Offline Danny Dugger

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 636
Re: Just preordered mine....which tail servo?
« Reply #14 on: October 12, 2017, 12:00:55 PM »
+1 for the MKS HBL980.
Logged
Pages: [1] 2
« previous next »