E5 tail grips lose

[rotorsport]

I have just finished building a new E5 and then I check the tail grips they have some play in them it almost feels like they are missing a shim

I have the thirst bearing in correctly with the larger ID in first and the smaller one to the out side.

Anyone else have the play on the tail grips?

Charles

[rotorsport]

Ok so I have been doing some more readying and it sounds like this is normal, I'am I reading this right?

[Jon Yarger]

That is completely normal. When the tail is spinning it hey will be out an equal amount.

[rotorsport]

Thanks Different than what I'm used to that is for sure.

ct 

[rotorsport]

In the E5 manual page 37 it says to apply grease to the Thrust Bearing Ball Race, the 5x10x3 radical bearings have no grease in them.

Do I apply grease to the Radial bearings?

[Chris Sexton]

In the E5 manual page 37 it says to apply grease to the Thrust Bearing Ball Race, the 5x10x3 radical bearings have no grease in them.

Do I apply grease to the Radial bearings?

The radials should be good to go.


Sent from my iPhone using Tapatalk