November 23, 2024, 07:48:47 AM
« previous next »
Pages: [1]

Author Topic: Am I an aggressive caveman when it comes to the keychain grommets on my 516?  (Read 2029 times)

Offline earlybird0513

  • Member
  • **
  • Posts: 76
Am I an aggressive caveman when it comes to the keychain grommets on my 516?
« on: July 23, 2018, 06:57:42 AM »
I’ve had 13 flights on my 516. Ive had to change the front grommets 3times now. Anybody having an issue with this or do I need to work on my canopy skills;-)
I’m looking at 110-418 rubber grommets to maybe replace the stock 305-126 grommet. Is that worth it. Or again I should work on my canopy skill?


Sent from my iPhone using Tapatalk
Logged

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: Am I an aggressive caveman when it comes to the keychain grommets on my 516?
« Reply #1 on: July 23, 2018, 02:54:04 PM »
Did you ream the holes in the canopy?
Logged
Rodney

Team Synergy

Offline earlybird0513

  • Member
  • **
  • Posts: 76
Re: Am I an aggressive caveman when it comes to the keychain grommets on my 516?
« Reply #2 on: July 23, 2018, 07:45:47 PM »
Quote from: Rodney Kirstine on July 23, 2018, 02:54:04 PM
Did you ream the holes in the canopy?
I might try that. The grommets went in good. Put my dremmel to some use


Sent from my iPhone using Tapatalk
Logged

Offline earlybird0513

  • Member
  • **
  • Posts: 76
Re: Am I an aggressive caveman when it comes to the keychain grommets on my 516?
« Reply #3 on: July 26, 2018, 03:19:56 PM »
Quote from: earlybird0513 on July 23, 2018, 07:45:47 PM
Quote from: Rodney Kirstine on July 23, 2018, 02:54:04 PM
Did you ream the holes in the canopy?
I might try that. The grommets went in good. Put my dremmel to some use


Sent from my iPhone using Tapatalk
I love my dremmel


Sent from my iPhone using Tapatalk
Logged

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: Am I an aggressive caveman when it comes to the keychain grommets on my 516?
« Reply #4 on: July 27, 2018, 03:03:40 PM »
 :D
Logged
Rodney

Team Synergy

Offline Wayne Derrick

  • Member
  • **
  • Posts: 78
Re: Am I an aggressive caveman when it comes to the keychain grommets on my 516?
« Reply #5 on: August 10, 2018, 08:23:32 AM »
So others that read this post may know, what size are you reaming the hole too?
Logged
Wayne Derrick

Offline earlybird0513

  • Member
  • **
  • Posts: 76
Re: Am I an aggressive caveman when it comes to the keychain grommets on my 516?
« Reply #6 on: August 10, 2018, 08:06:33 PM »
Quote from: Wayne Derrick on August 10, 2018, 08:23:32 AM
So others that read this post may know, what size are you reaming the hole too?
I haven’t done it yet. But I’ll probably just lightly trim the diameter with my dremmel. It probably only needs a very small amount removed.


Sent from my iPhone using Tapatalk
Logged

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: Am I an aggressive caveman when it comes to the keychain grommets on my 516?
« Reply #7 on: August 11, 2018, 10:24:57 PM »
I ream them to 9mm.
Logged
Rodney

Team Synergy

Offline Wayne Derrick

  • Member
  • **
  • Posts: 78
Re: Am I an aggressive caveman when it comes to the keychain grommets on my 516?
« Reply #8 on: August 11, 2018, 10:31:38 PM »
Thank You Rodney,
Logged
Wayne Derrick

Offline alan

  • Sr. Member
  • ****
  • Posts: 275
  • Team Helilids
Re: Am I an aggressive caveman when it comes to the keychain grommets on my 516?
« Reply #9 on: August 16, 2018, 06:28:29 PM »
I have a reamer specifically marked for the synergy grommet hole size. I also have found that moving the holes slightly away from each other with an Xacto knive prior to enlarging helps with fitment.
I've mounted a canopy or two.. Lol

Cheers
Alan


Sent from my iPhone using Tapatalk
Logged
Team Helilids RC

Offline earlybird0513

  • Member
  • **
  • Posts: 76
Re: Am I an aggressive caveman when it comes to the keychain grommets on my 516?
« Reply #10 on: August 16, 2018, 10:24:20 PM »
Quote from: Alan on August 16, 2018, 06:28:29 PM
I have a reamer specifically marked for the synergy grommet hole size. I also have found that moving the holes slightly away from each other with an Xacto knive prior to enlarging helps with fitment.
I've mounted a canopy or two.. Lol

Cheers
Alan


Sent from my iPhone using Tapatalk
Thxs Alan.


Sent from my iPhone using Tapatalk
Logged

Offline earlybird0513

  • Member
  • **
  • Posts: 76
Re: Am I an aggressive caveman when it comes to the keychain grommets on my 516?
« Reply #11 on: August 25, 2018, 01:43:05 PM »
Quote from: earlybird0513 on August 16, 2018, 10:24:20 PM
Quote from: Alan on August 16, 2018, 06:28:29 PM
I have a reamer specifically marked for the synergy grommet hole size. I also have found that moving the holes slightly away from each other with an Xacto knive prior to enlarging helps with fitment.
I've mounted a canopy or two.. Lol

Cheers
Alan


Sent from my iPhone using Tapatalk
Thxs Alan.


Sent from my iPhone using Tapatalk
Got that reaming tool from your site helilids. 9mm is a great diameter to fit those grommets on. I find those rubber grommets are gonna hold up longer with the 9mm hole. Thxs


Sent from my iPhone using Tapatalk
Logged
Pages: [1]
« previous next »