November 21, 2024, 06:54:51 PM
« previous next »
Pages: 1 ... 6 7 [8] 9

Author Topic: Synergy E5 - Information Thread  (Read 53156 times)

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: 6s E5 streched
« Reply #105 on: April 22, 2013, 05:19:07 PM »
Quote from: Joe Bastos on April 22, 2013, 01:34:00 PM
hey guys , have any one ran E5 streched on 6s yet , and what head speed we need to perform for mild 3D to sports fly ?

There's a guy on RR running an E5 stretched to a 700 running on 6S, and now 7S with Rail 696 blades.  He was running 1600 RPM but says he's run it at 1700-1750, as well.
Logged
Rodney

Team Synergy

flyalan

  • Guest
Re: 6s E5 streched
« Reply #106 on: April 22, 2013, 06:01:15 PM »
Quote from: Joe Bastos on April 22, 2013, 01:34:00 PM
hey guys , have any one ran E5 streched on 6s yet , and what head speed we need to perform for mild 3D to sports fly ?


To be clear were talking about a 600 conversion running 606's, etc?


Cheers
Alan



Logged

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: Synergy E5 - Information Thread
« Reply #107 on: April 22, 2013, 09:13:19 PM »
Here's the 700 7S at 1600rpm.

http://youtu.be/2keDrj9DlL4
Logged
Rodney

Team Synergy

Offline Greg J

  • Newbie
  • *
  • Posts: 39
  • This hobby in not a race, It's a Journey
Re: Synergy E5 - Information Thread
« Reply #108 on: April 23, 2013, 06:08:11 AM »
That was awesome! Thanks for the video, great flying, butter smooth. Nice job. 
Logged

Offline 86jeep

  • Newbie
  • *
  • Posts: 6
Re: Synergy E5 - Information Thread
« Reply #109 on: April 23, 2013, 05:00:40 PM »
That's mine in the video, hands down my favorite heli.. Here's the brake down.
E5 with e7 boom,shaft,control rod,boom supports and tail fin.
15t pinion
4.5 tail gear kit
80hv jive
8717 and 8900 jr servos
X-era 4030-560
Mini v-bar
696 mains
116 tails
Thunder power 7s 65c 4400's
As you can tell in the video it does 3d pretty good.
Logged
Greg
N5c,E5s and E5ss

Offline Chris Sexton

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2729
  • Admiral, There be whales here!
Synergy E5 - Information Thread
« Reply #110 on: April 23, 2013, 06:21:39 PM »
Ok that video was sick!!!


Sent from my iPhone using Tapatalk 2
Logged
Chris Sexton
Synergy Factory Specialist / Rail Blades / Team Scorpion

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: Synergy E5 - Information Thread
« Reply #111 on: April 23, 2013, 09:02:51 PM »
Quote from: Chris Sexton on April 23, 2013, 06:21:39 PM
Ok that video was sick!!!


Sent from my iPhone using Tapatalk 2

I know, right!?  I absolutely love my E5 as a 550 but, dang, I'm having a really hard time keeping myself from trying this...
Logged
Rodney

Team Synergy

Offline steffgiguere

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1373
Re: Synergy E5 - Information Thread
« Reply #112 on: April 29, 2013, 04:58:01 PM »
890 KV on 6S with 14 tooth pinion will be cutting it close, max, around 2400 head speed. I have a 890KV motor but running it on 7S.
Logged
Team Synergy, Canada

Offline Matt Botos

  • Synergy Hero
  • **
  • Posts: 1573
    • Matt Botos
Re: Synergy E5 - Information Thread
« Reply #113 on: May 13, 2013, 08:02:42 PM »
A++++ on the smooth smack video!
Excellent configuration and precision flying!


Matt
Logged

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: Synergy E5 - Information Thread
« Reply #114 on: May 19, 2013, 08:49:46 PM »
 The E7 pinion isn't compatible with the E5 main gear.  I have a 1220kv motor with a 13t pinion and I've run as high as 2800 rpm.
Logged
Rodney

Team Synergy

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: Synergy E5 - Information Thread SAVOX 1200KV
« Reply #115 on: May 25, 2013, 09:07:57 PM »
Quote from: Joe Bastos on May 25, 2013, 08:22:48 PM
savox 1200kv with 14t pinion was to fast for me .Great power tho, my batteries did not like that lol ,they got warm +,   ran 5 min at 90% flat curve  .will try tomorrow 12t pinion instead 14 .The head speed i was happy with was at 2400/2500 that is a sweet range. ;D .

Yep, that's probably my favorite head speed, as well.  I will admit, I did like 2800 quite a bit but didn't like the flight times.  ;D
Logged
Rodney

Team Synergy

Offline mrc3

  • Newbie
  • *
  • Posts: 11
Re: Synergy E5 - Information Thread
« Reply #116 on: May 29, 2013, 11:08:00 PM »
Suggestion for the Cyclic Servo Installation.  If you have Servos with a top mounted strain relief for the servo wires (Such as the RJX').  It makes installation much easier to pull the top bearing block, install the servos in the lower block, then slide the top block back into place.

Mike C.
Logged

Offline Greg Jackson

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1493
    • inner3.com
Re: Synergy E5 - Information Thread
« Reply #117 on: June 26, 2013, 12:06:55 PM »
Nice vid, wish I had a bright area to fly at night!
Logged
Synergy & Rail Field Representative
Team Scorpion||Team BK Servos||Team Pulse|

www.inner3.com

Offline Barry Tilson

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 617
  • Perspective Visuals
Re: Synergy E5 - Information Thread
« Reply #118 on: December 24, 2013, 07:31:03 PM »
E5 Tail boom won't right up?  Seems like the tail boom diameter is to small? Clamps are bottomed out? Thoughts?


Barry
Logged
Perspective Visuals

flyalan

  • Guest
Re: Synergy E5 - Information Thread
« Reply #119 on: December 24, 2013, 07:39:27 PM »
Barry,

Have you measures the boom against another?  I have never seen that happen before. Other end of the boom do the same thing?

Cheers

Alan
Logged
Pages: 1 ... 6 7 [8] 9
« previous next »