Lowest head setting link length?

[mattclark]

Hi guys

Sorry if this has been answered but I cant seem to find it anywhere. what is the link length for the grips to swash on the lowest head setting.

Thanks

Matt

[Ross Lawton]

Hi Matt,

The standard linkage length is 56mm between the ball links when the head is set at its highest/standard setting.

If your wishing to set the head at its lowest setting then the linkage length will need to be approx 40mm between the ball links, so you will need a linkage rod approx 55mm in length to give adequate thread in the ball links.

Hope this helps,
Cheers
Ross

[mattclark]

Good stuff thank you very much Ross

Matt