May 01, 2024, 03:01:28 PM
« previous next »
Pages: [1]

Author Topic: E5 Lipo figures  (Read 2053 times)

Offline Ktsn

  • Member
  • **
  • Posts: 67
E5 Lipo figures
« on: September 14, 2012, 09:59:55 AM »
Hello,

Was having a look at Gens Ace Website for both 6 an 12S setup. Most of them with lot of C are around 56mm on the thick side.

We know that maximum widh is 52mm. Does someone know the maximum height ?
If I pay attention to Matt's vid with TP 5000, he's installing the Lipo on its thinner side (47mm). So the 52mm side is on the height. Adding 3/4mm velcro, lipo seems to have a little more space. on the top.

Best
Logged

Offline Felt

  • Member
  • **
  • Posts: 64
E5 Lipo figures
« Reply #1 on: September 14, 2012, 09:21:32 PM »
I believe Matt told me the E5's forward battery compartment has a height of 65mm.  Which should make most 6S 5000s usable. However, hopefully Matt can clarify this. 
Logged

Offline Ktsn

  • Member
  • **
  • Posts: 67
Re: E5 Lipo figures
« Reply #2 on: September 15, 2012, 08:40:18 AM »
It Could be great if your information is right. That coud offer wide opportunity of lipo brand, C rate...
Logged

Offline Matt Botos

  • Synergy Hero
  • **
  • Posts: 1573
    • Matt Botos
Re: E5 Lipo figures
« Reply #3 on: October 10, 2012, 08:50:03 PM »
Yes, that is correct!
A friend fit his Gens Ace 5200mah pack inside the battery compartment with no problems.

Thanks,

Matt
Logged
Pages: [1]
« previous next »