May 16, 2024, 04:35:47 AM

Author Topic: I must have done something...  (Read 11105 times)

Offline Chris Sexton

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2729
  • Admiral, There be whales here!
Re: I must have done something...
« Reply #30 on: June 18, 2013, 03:57:10 PM »
Nice! I loved the feel right away too!
Chris Sexton
Synergy Factory Specialist / Rail Blades / Team Scorpion

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: I must have done something...
« Reply #31 on: June 20, 2013, 08:49:53 AM »
Holy smokes, the programming is sooooooooo different from Spektrum.  I at least managed to get my name entered, LOL.
Rodney

Team Synergy

Offline Mark Burberry

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 662
Re: I must have done something...
« Reply #32 on: June 20, 2013, 08:54:55 AM »
Hehe... Good start Rodney.  ;) ;D


Offline Greg Jackson

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1493
    • inner3.com
Re: I must have done something...
« Reply #33 on: June 22, 2013, 09:59:25 AM »
Will the JR and Futaba radios work well wih Vbar?  Thought I saw something about that.
Synergy & Rail Field Representative
Team Scorpion||Team BK Servos||Team Pulse|

www.inner3.com

Offline Chris Sexton

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2729
  • Admiral, There be whales here!
I must have done something...
« Reply #34 on: June 22, 2013, 10:51:45 AM »
Vbar supports all types of receivers. PPM, Sbus, Sbus2, spectrum sats, standard external receiver. Anything. Even the new JR DMSS.

Just have you power up the unit and tell it what kind of rx.


Sent from my iPhone using Tapatalk 2
Chris Sexton
Synergy Factory Specialist / Rail Blades / Team Scorpion

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: I must have done something...
« Reply #35 on: June 22, 2013, 11:06:43 AM »
Well, I'm off to maiden the E7 with the new radio.  I got almost everything set up the way that I want it.  I couldn't get the bank switching or gain adjustment endpoints for the SK540 set up yet but I don't want to spend more time digging in to figure it out, right now.  I just went ahead and locked the gains at values that I'm pretty sure are where I had them set before and I'll take my LCD field terminal with me so I can make adjustments if I need to.

The 14SG was actually easier to program than what I thought it would be, based on what I had read prior to buying it.

Oh yeah, and it's my birthday, so wish me luck.  I really don't want to lawn dart my E7 today!
Rodney

Team Synergy

Offline Mark Burberry

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 662
Re: I must have done something...
« Reply #36 on: June 22, 2013, 11:24:29 AM »
Good luck Rodney and a Happy BDay!!

Let us know how it goes.

Cheers,
Mark

Offline Chris Sexton

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2729
  • Admiral, There be whales here!
Re: I must have done something...
« Reply #37 on: June 22, 2013, 11:44:06 AM »
Well, I'm off to maiden the E7 with the new radio.  I got almost everything set up the way that I want it.  I couldn't get the bank switching or gain adjustment endpoints for the SK540 set up yet but I don't want to spend more time digging in to figure it out, right now.  I just went ahead and locked the gains at values that I'm pretty sure are where I had them set before and I'll take my LCD field terminal with me so I can make adjustments if I need to.

The 14SG was actually easier to program than what I thought it would be, based on what I had read prior to buying it.

Oh yeah, and it's my birthday, so wish me luck.  I really don't want to lawn dart my E7 today!

Happy Birthday Rodney!

Don't be surprise if you feel like you need some expo :) The Futaba radios are so much faster than the Spektrum radios!

As for the bank switching, you have to first set the switch you want to use to the correct channel on the Function menu, then you can adjust that channels end points and direction as needed. It took me a few to figure this out! I use banks a lot on my E5s and E750 so I had to figure it out :)

As for gain, thats on the Gyro menu. You can set what channel, defaults to gear for tail. You can set both tail and head gains here and link them to flight modes as well.  It really is neat what you can do with the 14SG.

Let me know if you need any help :) I am sure Alan can help as well, he is a wiz at Futaba!

Chris
Chris Sexton
Synergy Factory Specialist / Rail Blades / Team Scorpion

Offline Drew Robinson

  • Full Member
  • ***
  • Posts: 183
I must have done something...
« Reply #38 on: June 22, 2013, 11:50:35 AM »
Ok bought dx18 about month ago should I have gone with 14sg? My friends fly futaba but I can't stomach switching receivers! My friends make me feel bad about my dx18 but to me flys great.... Who's tried both?
**Team Synergy**Team Scorpion**

Offline Kevin Feil

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2100
Re: I must have done something...
« Reply #39 on: June 22, 2013, 03:01:05 PM »
Good Luck Rodney, And Happy Birthday Brother!!! ;)


Kevin
Team Synergy
Team Futaba
Team Scorpion
Team Morgan Fuels

Offline Chris Sexton

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2729
  • Admiral, There be whales here!
I must have done something...
« Reply #40 on: June 22, 2013, 03:59:03 PM »

Ok bought dx18 about month ago should I have gone with 14sg? My friends fly futaba but I can't stomach switching receivers! My friends make me feel bad about my dx18 but to me flys great.... Who's tried both?

I went from a dx18 to a futaba 14SG. Wasn't nearly as painful as I thought. By the time I sold all my spectrum rxs and sats i had plenty of money to buy the majority of my futaba rxs.

As far as flight differences. They both fly great. I switched because I wanted to learn futaba. Now that I have had a chance to learn futaba. I could be happy with both. But I do enjoy the flexibility and programmability of the futaba.


Sent from my iPhone using Tapatalk 2
Chris Sexton
Synergy Factory Specialist / Rail Blades / Team Scorpion

Offline Greg Jackson

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1493
    • inner3.com
Re: I must have done something...
« Reply #41 on: June 22, 2013, 05:31:18 PM »
Yeah i was wondering about your DX18 Chris.  Now that I see you have switched I'm thinking about it now.  I got spektrum because last year I started switching to blade stuff.  But I don't intend to buy any more products from that line.  Maybe it's time to research the futaba radios!
Synergy & Rail Field Representative
Team Scorpion||Team BK Servos||Team Pulse|

www.inner3.com

Offline Brandon Bartolomucci

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1007
I must have done something...
« Reply #42 on: June 22, 2013, 06:44:38 PM »
Just as a side slide in there, I have a DX18 and I enjoy it. I like it a lot better than my old DX8 for feel and functions.

I don't think you'd go wrong with either radio but if you already have the 18 there's nothing wrong with keeping it. Don't let other people make you feel bad or that you should switch something like that. Let it be your personal preference and likes.


Regards,
Brandon Bartolomucci
Sent from my iPhone
Regards,
Brandon Bartolomucci
Team Synergy; Scorpion; & Bavarian Demon

Offline Greg Jackson

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1493
    • inner3.com
Re: I must have done something...
« Reply #43 on: June 22, 2013, 07:01:37 PM »
Right now I have the dx7s. I like how it feels in my hands but at some point I would like to upgrade. No rush.  Maybe some new things will be unveiled in a couple I months at IRCHA.
Synergy & Rail Field Representative
Team Scorpion||Team BK Servos||Team Pulse|

www.inner3.com

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: I must have done something...
« Reply #44 on: June 22, 2013, 08:00:52 PM »
Well, I actually brought my helicopter home in one piece!  WOOT!

I really like the feel of the gimbals on this radio.  They are so smooth and precise feeling compared to my DX8.  I definitely still have some tweaking to do but, so far, I'm thinking it's definitely a big step up from the DX8.

I still have some things going on with my E7 that are making me really nervous.  It's still making that weird sound.  Also, on my last flight today, when the heli was kind of far out from me it was acting really strange.  I don't know if it really wasn't reacting to my inputs (which is what it seemed like) or if it was just far enough out and it's been long enough since I last flew, that I lost orientation and it just seemed to be doing weird things.  I've had so many weird crashes in the last several months, I'm just really paranoid.  I think I'm going to tear the E7 down pretty far and inspect everything and then start from scratch on the SK540 setup, just to make sure that I'm going through everything thoroughly.
Rodney

Team Synergy