November 22, 2024, 11:48:39 PM

Author Topic: e5 or e5 stretch  (Read 1929 times)

Offline Summa1988

  • Newbie
  • *
  • Posts: 5
e5 or e5 stretch
« on: August 24, 2013, 12:06:53 PM »
Hi. Today I decided to pough the field with my heli smashing it tail first into the mud   :'(

Its seem to have broken everything from the boom back over so made me think....should I replace the parts or should I stretch it as now be a good time to do so. Problem is im running 6s 5000packs would it be worth stretching
still or should I just replace back to standard?
Synergy E5 6s - cc 120/scorpion 1100/rails 556,96
Trex 700 HV DFC - yep 120/scorpion 560/ rails 696,106

flyalan

  • Guest
e5 or e5 stretch
« Reply #1 on: August 24, 2013, 12:26:32 PM »

Hi. Today I decided to pough the field with my heli smashing it tail first into the mud   :'(

Its seem to have broken everything from the boom back over so made me think....should I replace the parts or should I stretch it as now be a good time to do so. Problem is im running 6s 5000packs would it be worth stretching
still or should I just replace back to standard?

One of the guys I fly with did a 6S stretch. Flew well. I think he used 4400's. flight times were around 3-1/2 minutes. He use the align motor.
You end up dropping the head speed when stretched which will offset the increased power needed on the larger disk area.
What motor are you running?
Cheers
Alan

Offline Summa1988

  • Newbie
  • *
  • Posts: 5
Re: e5 or e5 stretch
« Reply #2 on: August 24, 2013, 12:32:50 PM »
Just the standard e5 scorpion 1100 motor. 3mins! Dam thats a short flight. I think ill keep it as it was as im gettin 4.30mins rite now
Synergy E5 6s - cc 120/scorpion 1100/rails 556,96
Trex 700 HV DFC - yep 120/scorpion 560/ rails 696,106

Offline Darren Lee

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 620
Re: e5 or e5 stretch
« Reply #3 on: August 24, 2013, 12:59:49 PM »
It all depends on the headspeed/performance you want.  Run 1900-2000 headspeed as a 600 and I'd bet you get close to 5 mins.

Personally, I prefer the larger disc.  Doesn't hurt to try it and see how you like it.
Team Synergy / Rail Blades / Morgan Fuel

Offline BrianE

  • Field Representative
  • Full Member
  • ****
  • Posts: 191
Re: e5 or e5 stretch
« Reply #4 on: August 25, 2013, 10:34:58 AM »
It all depends on the headspeed/performance you want.  Run 1900-2000 headspeed as a 600 and I'd bet you get close to 5 mins.

Personally, I prefer the larger disc.  Doesn't hurt to try it and see how you like it.

And if you've seen Darren fly, there is nothing he can't do with that headspeed  8)
E7SE, Sliverline VBar, Edge 160HVf, Scorpion HKIII 4530, Futaba BLS, OptiGuard and BEC Guards

E5-626, Vbar NEO, Edge 120HV, Scorpion HKIII 4035, MKS 950/980 OptiGuard and BEC Guards

Offline Summa1988

  • Newbie
  • *
  • Posts: 5
Re: e5 or e5 stretch
« Reply #5 on: August 25, 2013, 10:55:45 AM »
Ive just getting my hends on some cheap edge 553s so looks like im sticking with the standard e5 boom......for now lol
Synergy E5 6s - cc 120/scorpion 1100/rails 556,96
Trex 700 HV DFC - yep 120/scorpion 560/ rails 696,106